Log in to the VLNC4x circuit pack being provisioned.

From the Navigation menu, select QoS → Class of Service → Trust Mode Configuration to provision the class of service trust mode.

Result:

The Trust Mode Configuration screen appears.

Enter the required parameters, then click Submit.

From the Navigation menu, select QoS → Class of Service → Interface Configuration to specify the maximum transmission bandwidth limit for an interface.

Result:

The CoS Interface Configuration screen appears.

Enter the required parameters, then click Submit.

The Interface Shaping Rate is the interface bandwidth that is the maximum limit for the interface in Kbps. It is an integer in the range 0 - 1000000 (0 means "no shaping".) The value should be a multiple of 64, for example 1280.

See Procedure 14-9: Manage traffic expansion in TMPLS pseudowire encapsulation and Bandwidth calculations and rate shaping on T-MPLS NNIs for more information.

From the Navigation menu, select QoS → Class of Service → Interface Queue Configuration to specify the minimum percentage of transmission bandwidth guaranteed and activate the strict priority scheduler mode for an interface queue.

Result:

The CoS Interface Queue Configuration screen appears.

Enter the required parameters, then click Submit.

From the Navigation menu, select QoS → Class of Service → Interface Queue Status to view CoS interface queue information.

Result:

The CoS Interface Queue Status screen appears.

From the Navigation menu, select QoS → Class of Service → 802.1p Priority Mapping to map an 802.1p priority to an internal traffic class.

Result:

The 802.1p Priority Mapping screen appears.

Enter the required parameters, then click Submit.

End of steps