Procedure 6-1: Configure Ethernet port
Overview
Use this procedure to configure an Ethernet port and/or to view provisioned Ethernet port parameters.
Before you begin
Obtain the work instructions for this procedure.
Step
1 |
Log in to the VLNC4x/VLNC6x circuit pack being provisioned. | ||||||
2 |
From the Navigation menu, select Port → Ethernet Port → Configuration. Result: The Port Configuration screen appears. | ||||||
3 |
Enter the required parameters, then click Submit. | ||||||
4 |
Result: The Summary screen appears. | ||||||
5 |
If required, enable the backplane Ethernet port. Reference: Procedure 6-2: Enable/disable backplane Ethernet port | ||||||
6 |
If required on VLNC4x circuit pack, configure Ethernet port mirroring. Reference: Procedure 6-3: Configure Ethernet port mirroring on VLNC4x circuit pack End of steps |