Procedure 9-10.7: Assign Ethernet TCA Profile
OverviewStep
1 |
Log in to the VLNC42B. |
2 |
From the Navigation menu, select TMPLS → Performance Monitoring → Ethernet TCA Profile Assignment. Result: Ethernet TCA Profile Assignment screen displays. |
3 |
From the Ethernet Interface drop-down box, select the Ethernet interface being provisioned. |
4 |
Provision the parameters as shown in Ethernet TCA profile assignment parameters then click Submit to assign the TCA Profile to the selected Ethernet Incoming and Outgoing Aggregate data. End of steps |
Ethernet TCA profile assignment parameters
|
Parameter |
Value |
SNMP |
|---|---|---|
|
Ethernet Interface |
The Ethernet interface AID. A drop-down list containing all Etherent interfaces in the system. |
|
|
Direction |
Valid values: Incoming, Outgoing |
Incoming: enhEth AggrCDRxTable or enhEthAggrHDRxTable Outging: enhEthAggrCDTxTable or enhEthAggrHDTxTable |
|
Time Period |
This parameter identifies the accumulation time period for TCA (1-day or 15-minute collection register). Valid values: Valid values |
enhEthAggrCDThreshold- GranularityPeriod |
|
TCA Profile |
This parameter specifies which TCA Profile to be applied to the selected Ethernet interface. It is a drop-down list containing the system default profiles. Valid value: an integer value in the range of 0 - 3. |
enhEthAggrCDThresholdIndex |
|
Display | ||
|
Monitor Type |
The PM parameter name. See Table 9-5, Monitor types for incoming aggregate dataor Table 9-6, Monitor types for outgoing aggregate data. |
XXXXX (e.g. EINF) |
|
Threshold Enable |
The field indicates whether or not the threshold is enabled. |
enhEthAggrCDThresholdRx( Tx)XXXXEn able |
|
Low Threshold (Clear) |
Lowest Threshold value for the monitored PM paramter. Example: for EINF: the MIB parameter is enhEthAggrCDThresholdRxEINFLowThr |
enhEthAggrCDThresholdRx( Tx)XXXXLo wThr |
|
High Threshold (Raise) |
Highest Threshold value for the monitored PM parameter. Example: for EINF: the MIB parameter is enhEthAggrCDThresholdRxEINFHighThr |
enhEthAggrCDThresholdRx( Tx)XXXXHig hThr |