This section describes the requirements for managing the PHB Profile, OAM PHB Profile and Traffic Descriptor for the TMPLS services. The PHB and OAM PHB Profiles are referenced by the Tunnel Segment or Pseudo Wire Segment. The Traffic Descriptor is referenced by the Tunnel or Pseudo Wire.
Refer to the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) TL1 Command Guide for T-MPLS, for help on using TL1 commands.
1 |
Login to the VLNC42B. |
2 |
Perform the following as required: End of steps |
Copyright © 2011 Alcatel-Lucent. All rights reserved. |