Procedure 5-3: Display dual image status (software versions)
Overview
The VLNC4x/VLNC6x contains up to two software loads, referred to as Image1 and Image2.
Use this procedure to display information for the version and the activation status of the current active and backup software images. It also displays any description text associated with an image as well as the switch activation status.
Refer to the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide, for help on using CLI commands.
Step
1 |
Login to the VLNC4x/VLNC6x. |
2 |
From the Navigation menu, select System → Dual Image Status. Equivalent CLI command: From the Privileged EXEC prompt, enter show bootvar to show the version and status of the current active and backup images. Result: The Dual Image Status screen displays the Dual Image Status. The system displays the software versions held in the Image1 and Image2 memory banks. It also shows which Image is the active Image for the boot sequence. |
3 |
If required, click Refresh to refresh the page with the latest data. See Dual image status display. End of steps |
Dual image status display
|
Parameter |
Description |
CLI command |
|---|---|---|
|
Image 1 Ver |
The version number of Image1. |
show bootvar |
|
Image 2 Ver |
The version number of Image2. |
|
|
Backup |
The version number of the backup copy. |
|
|
Current-active |
Current active image |
|
|
Next-active |
Next active image |
|
|
Image 1 Description |
The text description of Image1. |
|
|
Image 2 Description |
The text description of Image2. |