To view simulated IGP network data
General information
Perform this procedure to view configuration information about simulated network objects in a scenario. You can perform this procedure for scenarios that you created from an existing IGP administrative domain, OSPF area, checkpoint, or existing scenario.
Steps
|
|
1 |
Perform
To create a scenario to create a scenario or
To open a scenario to open an existing scenario.
|
2 |
Right-click on the SIMULATION - IGP Model - Scenario topology map and choose IGP Network Data. The SIMULATION - IGP Model - Scenario form opens.
|
3 |
Perform one of the following:
-
For an OSPF scenario, choose one of the following objects from the object drop-down menu:
-
Simulated OSPF Area (CPAM: Simulated Topology)
-
Simulated OSPF Link (CPAM: Simulated Topology)
-
Simulated OSPF Virtual Link (CPAM: Simulated Topology)
-
Simulated OSPF Subnet (CPAM: Simulated Topology)
-
Simulated Router (CPAM: Simulated Topology)
Note: Alternatively, you can right-click on an object on the simulation topology map and choose Properties from the contextual menu. The properties form for the object opens with the General tab displayed.
-
For an ISIS scenario, choose one of the following from the object drop-down menu:
-
Simulated ISIS Link (CPAM: Simulated Topology)
-
Simulated ISIS Routing Domain (CPAM: Simulated Topology)
-
Simulated ISIS Subnet (CPAM: Simulated Topology)
-
Simulated Router (CPAM: Simulated Topology)
Note: Alternatively, you can right-click on an object on the simulation topology map and choose Properties from the contextual menu. The properties form for the object opens with the General tab displayed.
|
4 |
Specify a filter for the search, if required, and click on the Search button.
|
5 |
Choose an entry and click on the Properties button.
|
6 |
Perform of the following:
-
If you are viewing a simulated OSPF area, the Simulated OSPF Area (Edit) form opens with the General tab displayed. Perform
To view and configure a simulated OSPF area .
-
If you are viewing a simulated OSPF link, the Simulated OSPF Link (Edit) form opens with the General tab displayed. Perform
To view and configure a simulated OSPF virtual link .
-
If you are viewing a simulated OSPF virtual link, the Simulated OSPF Virtual Link (Edit) form opens with the General tab displayed. Perform
To view and configure a simulated OSPF virtual link .
-
If you are viewing a simulated OSPF subnet, the Simulated OSPF Subnet (Edit) form opens with the General tab displayed. Perform
To view and configure a simulated OSPF subnet .
-
If you are viewing a simulated OSPF router, the Simulated OSPF Router (Edit) form opens with the General tab displayed. Perform
To view and configure a simulated OSPF router .
-
If you are viewing a simulated ISIS link, the Simulated ISIS Link (Edit) form opens with the General tab displayed. Perform
To view and configure a simulated ISIS link .
-
If you are viewing a simulated ISIS routing domain, the Simulated ISIS Routing Domain (Edit) form opens with the General tab displayed. Perform
To view and configure a simulated ISIS routing domain .
-
If you are viewing a simulated ISIS subnet, the Simulated ISIS Subnet (Edit) form opens with the General tab displayed. Perform
To view and configure a simulated ISIS subnet .
-
If you are viewing a simulated ISIS router, the Simulated Router (Edit) form opens with the General tab displayed. Perform
To view and configure a simulated ISIS router .
|
7 |
Close the SIMULATION - IGP Model - Scenario form, if required.
|
8 |
Close the SIMULATION - IGP Model - Scenario topology map, if required.
End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.