How do I configure an e-mail policy?

Purpose

The e-mail policy feature allows administrative users to configure e-mail notification policies for specific alarm messages in NFM-P, WS-NOC, MDM, and NSP. See What can I configure on the E-mail Policies page? for information about e-mail policies.

Steps

You must have administrator privileges to configure alarm e-mail policies.

 
1 

In the Network Map And Health, Current Alarms view click the More button png5.png and select Settings. The Alarm Settings form opens.

2 

Click E-mail Policies on the left-hand panel.

3 

Click on the + Email Policy button png48.png.

4 

Type a name for the policy.

5 

Select Enabled or Disabled in the Policy Status drop-down menu.

6 

Select an alarm filter.

The Alarm Filter menu is populated with public advanced filters configured and saved in the Current Alarms list; see What can I do in the alarm lists?.

7 

Adjust the Max E-mails Per Hour slider to set the maximum number of alarm notifications that can be sent per hour.

8 

In the Recipient List field, specify the e-mail addresses of the intended recipients for the alarm notification. You can specify up to 20 recipients.

9 

Click Save to save the e-mail policy.

End of steps