To configure an OmniSwitch AOS QoS Network Group policy
Purpose
Perform this procedure to create or modify an AOS QoS Network Group policy. You can select network group policies to define a Source Network Group or Destination Network Group during configuration of IP match criteria in an AOS QoS Condition policy; see To configure an OmniSwitch QoS Condition policy.
Steps
1 |
Choose Policies→QoS→AOS QoS Policies from the NFM-P main menu. The AOS QoS Policies form opens. |
2 |
Click Create→QoS Network Group, or choose QoS Network Groups (AOS QoS) from the object drop-down menu and select a Network Group, then click Properties. The AOS QoS Network Group - Global Policy (Create|Edit) form opens. |
3 |
If you are creating an AOS QoS Network Group policy, configure the Displayed Name parameter. |
4 |
Click on the Network Group Element tab and choose an item from the list, or click Create. The QoS Network Group Element (Create|Edit) form opens. |
5 |
Configure the required parameters and click OK. |
6 |
Create additional network group elements as required. |
7 |
Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs. End of steps |