To configure an OmniSwitch QoS Condition policy
Note: OmniSwitch QoS policies consist of a condition and an action. You must configure at least one condition and one action before you can create a policy.
Steps
1 |
Choose Policies→QoS→AOS QoS Policies from the NFM-P main menu. The AOS QoS Policies form opens. |
2 |
Click Create→QoS Condition or choose an AOS QoS condition and click Properties. The AOS QoS Condition - Global Policy (Create | Edit) form opens. |
3 |
Configure the Displayed Name parameter. |
4 |
Click on the Filter Properties tab and configure the required parameters in the Port Match Criteria panel. |
5 |
Click on the Layer 2 tab and configure the required parameters. In the MAC Match Criteria panel, click Select to choose an AOS QoS MAC Group policy for the Source MAC Group and Destination MAC Group; see To configure an OmniSwitch AOS QoS MAC Group policy. |
6 |
Click on the Layer 3 tab and configure the required parameters. In the IP Match Criteria panel, click Select to choose an AOS QoS Network Group policy for the Source Network Group and Destination Network Group; see To configure an OmniSwitch AOS QoS Network Group policy. |
7 |
Click on the Layer 4 tab and configure the IP Protocol parameter, if required. |
8 |
If you set the IP Protocol to a value other than HOPOPT (0) in the previous step, configure the required parameters in the IP Port Match Criteria panel. |
9 |
Save your changes and close the forms. End of steps |