To create and run an Mtrace2 OAM diagnostic test from the STM
Steps
1 |
Choose Tools→Service Test Manager (STM) from the NFM-P main menu. The Service Test Manager form opens. |
2 |
Click Create and choose Multicast→Mtrace2. The Mtrace2 (Create) form opens. |
3 |
Configure the required parameters. |
4 |
Click on the Test Parameters tab and configure the required parameters. |
5 |
Click on the Results Configuration tab and configure the required parameters. |
6 |
Save the changes and close the forms. |
7 |
To run the OAM diagnostic test and view the results, perform To run one or more OAM diagnostic tests from the STM and view the test results. See To interpret OAM diagnostic test results on the STM for information about how to interpret the test results. End of steps |