Workflow for synchronization management
General information
This workflow assumes that PTP peers are configured. See Configuring shelf objects using the NFM-P for more information about configuring timing and IEEE 1588 PTP clocks.
Stages
1 |
Configure synchronization domains and create synchronization groups. See To configure a synchronization domain and create synchronization groups . |
2 |
Create unidirectional and bidirectional IP path monitors, as required. See To create IP path monitors for PTP peers . |
3 |
View IP path monitors, as required. See To view an IP path monitor from the synchronization manager . |
4 |
Perform path monitoring procedures, as required. See the NSP NFM-P Control Plane Assurance Manager User Guide. |
5 |
Perform synchronization topology monitoring procedures, as required. See To use the synchronization topology map. |