To configure the device chassis mode
Before you begin
The device chassis mode must be set to indicate the minimum IOM or IMM card type that is initialized by the NE. This also determines other features available to the system. The behavior of the installed card depends on the chassis mode configured on the device. See Shelf objects in the NFM-P navigation tree and Working with card and card slot objects for more information about chassis modes and card types.
Steps
1 |
On the equipment tree, expand Network→NE→Shelf. |
2 |
Right-click on the Shelf object and choose Properties. The Shelf (Edit) form opens. |
3 |
Configure the parameters:
|
4 |
Save your changes and close the form. End of steps |