To configure a 7210 SAS-M channelized TDM DS1 or E1 port
Steps
1 |
On the equipment tree, navigate to the port object where you want to configure a 7210 SAS-M channelized TDM DS1 or E1 port. The path is Network→NE→Shelf→Card Slot n→Daughter Card Slot n→Port n/n/n. |
2 |
Right-click on a 7210 SAS-M port object that contains a channelized DS1 or E1 and choose Properties. The Physical Port (Edit) form opens. |
3 |
Configure the required parameters. |
4 |
Select a split horizon group. Note: To create or delete a 7210 SAS SHG, see To create a 7210 SAS SHG . |
5 |
Click on the DS1/E1 tab and configure the required parameters. The Line Impedance parameter only appears when the Port Type parameter is set to E1. |
6 |
Click on the QoS Pool tab. |
7 |
Choose a QoS pool from the list and click Properties. The QoS Pool (Edit) form opens. |
8 |
Select a slope policy. |
9 |
Save your changes and close the form. |
10 |
Click on the States tab and configure the Administrative State parameter. |
11 |
Save your changes and close the forms. End of steps |