Workflow to configure Wi-Fi local breakout using L2–aware NAT
Stages
1 |
Configure an ACL IP filter policy. Configure the filter entries on the policy with the required match criteria and a filter action of GTP Local Breakout. See To configure an ACL IP filter policy. |
2 |
Bind the ACL IP filter policy configured in Stage 1 to the subscriber SLA profile. See To configure an SLA profile. |
3 |
Under the appropriate routing Instance, configure outside NAT pools with address ranges. See To configure NAT on a routing instance. |
4 |
Configure a NAT policy and bind it to the outside NAT pool configured in Stage 3 . See To configure a NAT policy. |
5 |
Bind the NAT policy configured in Stage 4 to the subscriber profile for the subscriber. See To configure a subscriber profile. |