To create an LSP path using a tunnel template

Purpose

Before you can create an LSP path from a tunnel template, you must create the tunnel template. You can use an existing LSP path to create a tunnel template.

Steps
 

Choose Manage→MPLS→Dynamic LSPs from the NFM-P main menu. The Manage Dynamic LSPs form opens.


Click on the Create from Template button. The Create Dynamic LSP from Template list form opens displaying previously created templates.


Choose an LSP template. The template must be one where you associated a child LSP Path template to the parent LSP template.


Click OK. The Create Dynamic LSP from Template form opens. See To create a Dynamic or segment routing LSP from a tunnel template for information about creating a Dynamic LSP from a template.


Click OK and perform one of the following:

  1. If the Show Created Object parameter is enabled on the template, the Dynamic LSP (Edit) form opens. Go to Step 6 .

  2. Open the Dynamic LSPs (Edit) form.

    Use the following steps:

    1. Choose Manage→MPLS→Dynamic LSPs from the NFM-P main menu. The Manage Dynamic LSPs form opens.

    2. Select the Dynamic LSP that you created in Step 4 and click Properties. The Dynamic LSP (Edit) form opens.


Click on the LSP-Path Bindings tab.


Click on the Create from Template button. A pop-up menu appears with a selection of LSP path templates.


Click on the template you require for the LSP path.


Configure the required parameters.


10 

Click on the Inheritance tab.


11 

Configure the Overridden Properties parameter.


12 

Save your changes and close the forms.

End of steps