Workflow to configure OSPFv2 and OSPFv3
Stages
1 |
Enable OSPF on a routing instance; see To enable OSPF on a routing instance . |
2 |
Create at least one OSPFv2 or OSPFv3 area; see To create an OSPF area . |
3 |
Create an OSPF neighbor on an OmniSwitch as required; see To create an OSPF neighbor on an OmniSwitch . |
4 |
Assign Layer 3 interfaces to the routers in the OSPFv2 or OSPFv3 area; see To add a Layer 3 interface to an OSPF router . |
5 |
Create an OSPF area range as required; see To create an OSPF area range . |
6 |
Create a virtual link between the backbone OSPF area and a remote OSPF area that does not advertise the OSPF topology as required; see To create a virtual link between OSPF areas . |
7 |
Configure OSPF on a default routing instance or a VRF routing instance; see To configure OSPF on a default routing instance or a VRF routing instance . |
8 |
Configure OSPF segment routing as required; see To configure OSPF segment routing. |
9 |
Assign routers to the OSPFv2 or OSPFv3 area; see To add a router to an OSPF area . |