To configure IGMP on an OmniSwitch
Note: IGMP parameters can be configured globally or for each VLAN site. The VLAN site IGMP configuration overrides the routing instance IGMP settings. You can only configure VLAN site IGMP parameters after you create the VLAN. See To configure IGMP on an OmniSwitch VLAN site for information about configuring IGMP on an OmniSwitch VLAN site.
Steps
1 |
In the navigation tree Routing view, expand Network→NE→Routing Instance→IGMP. |
2 |
Right-click on the IGMP icon and choose Properties. The IGMP (Edit) form opens. |
3 |
Configure the required parameters. Note: When the Administrative State parameter is set to Up, the IP multicast switching is enabled on the OmniSwitch. |
4 |
Save your changes and close the form. End of steps |