To configure IGMP on an OmniSwitch VLAN site

Purpose

OmniSwitch IGMP parameters can be configured globally and per VLAN site. You can configure VLAN site IGMP parameters only after you create the VLAN. VLAN IGMP configuration settings override global IGMP settings. See To configure IGMP on an OmniSwitch for information about configuring global OmniSwitch IGMP parameters.

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose an OmniSwitch VLAN service and click Properties. The VLAN Service Name (Edit) form opens.


On the service navigation tree, right-click on the site on which you want to configure IGMP parameters. The Site (Edit) form opens.


Click on the IGMP tab.


Choose an entry from the list and click Properties. The IGMP (Edit) form opens.


Configure the required parameters.

When the Administrative State parameter is Up, IP multicast switching is enabled on the OmniSwitch for standard and L2 VPN (TLS/VLAN-Stacking) VLAN services.


To create one or more static IGMP groups:

  1. Click on the Multicast Group tab.

  2. Click Create. The Group (Create) form opens.

  3. Select a terminating port.

  4. Configure the Multicast Group IP Address parameter.

  5. Save the changes and close the form.


To create one or more static IGMP neighbors:

  1. Click on the Multicast Neighbor tab.

  2. Click Create. The Neighbor (Create) form opens.

  3. Select a terminating port.

  4. Save the changes and close the form.


To create one or more static IGMP queriers:

  1. Click on the Multicast Querier tab.

  2. Click Create. The Querier (Create) form opens.

  3. Select a terminating port.

  4. Save the changes and close the form.


10 

Save the changes and close the forms.

End of steps