To configure a queue group redirect list policy

Purpose

You can create a Queue Group Redirect List policy to provide QoS control to map IPv4 and IPv6 traffic using a single VXLAN or VXLAN GPE VNI to an ingress access queue group instance or a port access egress queue group instance. See Queue Group policies for more information.

After you create a queue group redirect list policy, you must release and distribute the policy, then associate the policy with an egress/ingress physical interface (SAP) that supports IES or VPRN services.

Steps
 

Choose Policies→QoS→SROS QoS→Queue Group→Redirect List from the NFM-P main menu. The Redirect List Queue Group Policies form opens.


Click Create or choose an existing queue group redirect list policy and click Properties. The Queue Group Redirect List Policy (Create | Edit) form opens.


Configure the required parameters.


Click on the Match tab and click Create. The Redirect List Match, Queue Group Redirect List Policy form opens.


Configure the required parameters.


Click OK to save the changes and close the form. The Queue Group Redirect List Policy (Create | Edit) form reappears.


Click OK to save the changes and close the form. The Redirect List Queue Group Policies form reappears.


Release and distribute the queue group redirect list policy to the NEs
 

To release and distribute the policy, click Search, select the newly created policy and click Properties. The Queue Group Redirect List Policy (Edit) form opens.


Perform the required steps in To release and distribute a policy to release and distribute the policy.


Associate the queue group redirect list policy to an IES or VPRN ingress SAP
 
10 

Create a queue group ingress template policy as described in To configure a queue group ingress template policy .


11 

Perform the required steps in To release and distribute a policy to release and distribute the policy.


12 

Attach the newly created queue group ingress template policy to the forwarding plane of a card slot on the Access Ingress Queue Group tab; see To configure an ingress queue group on a forwarding plane.


13 

Perform the following actions on the QoS tab associated with an ingress L3 access interface (SAP) that supports an IES or VPRN service; see To assign ingress and egress QoS policies to an IES L3 access interface.

  1. Click Select to choose the queue group ingress template policy created in Step 10.

  2. Click Select to choose the queue group redirect list policy created in Step 1 to Step 7.

  3. Configure any other required parameters on the form and click OK to save your changes and close the form.


Associate the queue group redirect list policy to an IES or VPRN egress SAP
 
14 

Create a queue group egress template policy as described in To configure a queue group egress template policy .


15 

Perform the required steps in To release and distribute a policy to release and distribute the policy.


16 

Attach the newly created queue group egress template policy to the physical port on the Access Egress Queue Group tab; see To add a queue group to an Ethernet port.


17 

Perform the following actions on the QoS tab associated with an egress L3 access interface (SAP) that supports an IES or VPRN service; see To assign ingress and egress QoS policies to an IES L3 access interface.

  1. Click Select to choose the queue group ingress template policy created in Step 14.

  2. Click Select to choose the queue group redirect list policy created in Step 1 to Step 7.

  3. Configure any other required parameters on the form and click OK to save your changes and close the form.

End of steps