To create and run a MAC trace OAM diagnostic test from the STM
Steps
You can also perform this diagnostic test from the Test tab of a VPLS or an Epipe VLL.
1 |
Choose Tools→Service Test Manager (STM) from the NFM-P main menu. The Service Test Manager form opens. |
2 |
Click Create and choose L2 Service→MAC Trace. The MAC Trace (Create) form opens. |
3 |
Configure the required parameters. When the Service Name parameter is configured, you can configure the Name parameter for the site. |
4 |
Click on the Test Parameters tab and configure the required parameters. The Probe History parameter is only configurable when the NE Schedulable parameter is enabled. |
5 |
Click on the Results Configuration tab and configure the required parameters. |
6 |
Save the changes and close the forms. |
7 |
To run the OAM diagnostic test and view the results, perform To run one or more OAM diagnostic tests from the STM and view the test results . See To interpret OAM diagnostic test results on the STM for information about how to interpret the test results. End of steps |