To specify QoS policy overrides on an IES L3 access interface

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose an IES service and click Properties. The IES Service (Edit) form opens.

3 

Expand the Site icon in the service navigation tree on which you need to configure the L3 access interface, right-click on the L3 Access Interface icon and choose Properties. The IES L3 Access Interface (Edit) form opens.

4 

Click on the Override Policy Items tab.

Note: The Override Policy Items tab contains a number of tabs. However, the tabs that are displayed depend on the port type that you have chosen for this interface.

  • If you configured a non-HSMDA port, the Access Ingress Queues, Access Egress Queues, Ingress Policer, and Egress Policer tabs are active.

  • If you configured an HSMDA port, the Access Ingress Queues, Access Egress HSMDA Queues, and Ingress Policer tabs are active.

Configure the policy overrides, as described in To configure QoS policy overrides on an L2 or L3 access interface .

To configure meter overrides on a 7210 SAS, see To configure QoS policy overrides on access ingress meters for the 7210 SAS . To configure queue overrides on a 7210 SAS, see To configure QoS policy overrides on access ingress queues for a 7210 SAS-X .

5 

Save the changes and close the forms.

End of steps