To configure a virtual port using the Port QoS form


1	Choose Manage→Equipment→Port QoS from the NFM-P main menu. The Manage Port QoS form opens.
2	Click Add →Virtual Port(s). The Egress Scheduling Virtual Port (Create) form opens.
3	Configure the required general parameters.
4	Select a port scheduler policy in the Port Scheduler Policy panel.
5	Select a scheduler policy in the Scheduler Policy panel.
6	If you did not select a scheduler policy in Step 6 , configure the parameters in the Aggregate Rate Limit panel. The Limit Unused Bandwidth parameter is only available on access ports and on SONET channels when an ATM MDA is used.
7	Configure the Status parameter in the Egress Rate Modify panel.
8	Click on the Host Matching tab.
9	Click Create. The Host Matching (Create) form opens.
10	Configure the Destination String parameter.
11	Save your changes and close the form.
12	Click on the Targeted Physical Ports tab.
13	Click Add. The Select Site form opens.
14	Select one or more sites. The count displayed on the form reflects the total number of found ports and may not align with the number of applicable ports displayed in the list.
15	Save your changes and close the forms. End of steps