To create an OmniSwitch L2 VPN TLS VLAN service

Note: The TLS Mode must be set to Ethernet Service before a sL2 VPN TLS (stacked) VLAN service can be created on an OmniSwitch. See To configure bridging on an OmniSwitch to configure the TLS Mode.

Nokia recommends that you configure OmniSwitch network ports before you configure a L2 VPN TLS VLAN service.

Steps
 
1 

Choose Create→Service→VLAN from the NFM-P main menu. The VLAN Service (Create) form opens.

2 

Select a customer to associate with the L2 VPN TLS VLAN.

3 

Configure the required general parameters.

The Service ID parameter is configurable when the Auto-Assign ID parameter is disabled.

The SVC Mgr Service ID parameter is configurable when the Auto-Assign ID parameter is disabled.

4 

Click on the VLAN tab and set the Application parameter to L2-VPN (TLS/VLAN-Stacking).

5 

Select a group to associate with the L2 VPN in the Group panel.

6 

On the navigation tree, right-click on VLAN and choose Create VLAN Site to select a site for the VLAN. The Site (Create) form opens.

7 

Configure the required general parameters.

8 

Perform To add Ethernet services to a VLAN Site to add one or more Ethernet services to the VLAN site.

9 

Click on the STP tab and configure the parameters.

10 

To enable DHCP snooping on the VLAN:

  1. Click on the DHCP Snooping tab.

  2. Click Create. The VLAN Level DHCP Snooping (Create) form opens.

  3. Configure the required parameters.

    These parameters are automatically enabled when DHCP snooping is enabled on a VLAN.

  4. Save the changes and close the form.

11 

To add one or more static entries to the DHCP binding table:

  1. Click on the Binding Database tab.

  2. Click Create. The DHCP Snooping Binding Database (Create) form opens.

  3. Configure the MAC Address parameter.

  4. Select a port.

  5. Configure the required parameters.

  6. Save the changes and close the form.

12 

Save the changes and close the forms.

End of steps