To create an OmniSwitch BTV VLAN service

Steps
 

Choose Create→Service→VLAN from the NFM-P main menu. The VLAN (Create) Service form opens.


Select a customer to associate with the VLAN.


Configure the required general parameters:

The Service ID parameter is configurable when the Auto-Assign ID parameter is disabled.

The SVC Mgr Service ID parameter is configurable when the Auto-Assign ID parameter is disabled.


Click on the VLAN tab and set the Application parameter to Broadcast TV (MVR/IPMV).


Select a group to associate with the VLAN in the Group panel.


Configure the Type parameter in the IPMVLAN panel.


On the navigation tree, right-click on VLAN and choose Create VLAN Site to select a site for the VLAN. The Site (Create) form opens.


Configure the required general parameters.


Perform To associate an access interface with a VLAN service to create one or more access interfaces on the site.


10 

Perform To add Ethernet services to a VLAN Site to add one or more Ethernet services to the VLAN site.


11 

Click on the STP tab and configure the parameters.


12 

To enable DHCP snooping on the VLAN:

  1. Click on the DHCP Snooping tab.

  2. Click Create. The VLAN Level DHCP Snooping (Create) form opens.

  3. Configure the required parameters.

    These parameters are automatically enabled when DHCP snooping is enabled on a VLAN.

  4. Save the changes and close the form.


13 

To add one or more static entries to the DHCP binding table:

  1. Click on the Binding Database tab.

  2. Click Create. The DHCP Snooping Binding Database (Create) form opens.

  3. Configure the MAC Address parameter.

  4. Select a port.

  5. Configure the required parameters.

  6. Save the changes and close the form.


14 

To add one or more multicast group addresses to the site:

  1. Click on the Multicast Groups tab.

  2. Click Create. The Multicast Group (Create) form opens.

  3. Configure the Multicast Address parameter.

  4. Save the changes and close the form.


15 

To add one or more customer VLAN tags to the site:

  1. Click on the Customer VLAN Tags tab.

  2. Click Create. The Customer VLAN Tag (Create) form opens.

  3. Configure the Customer VLAN Tag parameter.

  4. Save the changes and close the form.


16 

Save the changes and close the forms.

End of steps