To configure ISIS, L2TP, MLD, OSPFv2, OSPFv3, PIM, RIP, or WPP on a VPRN routing instance

Note: To configure BGP on a VPRN routing instance, see To configure BGP on a VPRN routing instance .

To configure IGMP on a VPRN routing instance, see To configure IGMP on a VPRN routing instance.

To configure MSDP on a VPRN routing instance, see To configure MSDP on a VPRN routing instance.

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose the VPRN service on which you want to configure the protocols and click Properties. The VPRN Service (Edit) form opens.

3 

On the service navigation tree, expand Sites→Routing Instance→Routing Instance→Routing Instance→Protocols.

4 

Right-click on the Protocols icon and choose:

  1. Create ISIS Site to configure ISIS on the VPRN routing instance, and see To configure IS-IS on a routing instance .

  2. Create L2TP Site to configure L2TP on the VPRN routing instance, and see To configure L2TP on a routing instance .

  3. Create OSPF Site to configure OSPFv2 on the VPRN routing instance, and configure the parameters as described in To configure OSPF on a default routing instance or a VRF routing instance .

  4. Create OSPF Site to configure OSPFv3 on the VPRN routing instance, and configure the parameters as described in To configure OSPF on a default routing instance or a VRF routing instance .

  5. Create RIP Site to configure RIP on the VPRN routing instance, and see To configure global-level RIP or RIPng .

  6. Create WPP Site to configure WPP on the VPRN routing instance, and see To create a web portal routing instance .

  7. Create PIM Site to configure PIM on the VPRN routing instance, and see To create a PIM site on a VPRN routing instance .

  8. Create MLD Site to configure MLD on the VPRN routing instance, and see To enable MLD on a base routing instance .

    Note: You must ensure that the VPRN routing instance has an associated L3 access interface, and that the IPv6 Allowed parameter on the interface is enabled. You must add an IPv6 address to the L3 access interface. See To configure an L3 access interface on a VPRN site and To assign an IP address to a VPRN L3 access interface .

5 

Save the changes and close the forms.

End of steps