To specify QoS policy overrides on a VPRN L3 access interface

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.

3 

On the service navigation tree, expand Site→L3 Access Interfaces, right-click on an L3 access interface choose Properties. The VPRN L3 Access Interface (Edit) form opens.

4 

Click on the Override Policy Items tab.

Note: The Override Policy Items tab contains a number of tabs. However, the tabs that are displayed depend on the port type that you have chosen for this interface.

  • If you configured a non-HSMDA port, then the Access Ingress Queues, Access Egress Queues, Ingress Policer, and Egress Policer tabs are active.

  • If you configured an HSMDA port, then the Access Ingress Queues, Access Egress HSMDA Queues and Ingress Policer tabs are active.

Configure the policy overrides, as described in To configure QoS policy overrides on an L2 or L3 access interface .

To configure meter overrides on a 7210 SAS, see To configure QoS policy overrides on access ingress meters for the 7210 SAS .

To configure queue overrides on a 7210 SAS, see To configure QoS policy overrides on access ingress queues for a 7210 SAS-X .

5 

Save the changes and close the forms.

End of steps