To create a network interface on a CPM virtual routing instance

Purpose

Perform this procedure to create network interfaces on a CPM virtual routing instance. Up to two network interfaces can be created on the virtual routing instance with up to two ports each. A limited number of attributes are supported on the interface.

See To configure network interfaces on a CPM virtual routing instance to re-configure a network interface after it is created. See Workflow to configure NE routing and forwarding for information about how to configure other L3 network interfaces on routing instances.

Steps
 

In the navigation tree routing view, expand Network→NE→Routing Instance.


Right-click on the routing instance icon and choose Create Interface. The Create Network Interface step form opens.


Configure the parameters on the Define General Properties form as required.


Click Next. The Configure IP Address form opens.

Perform the following steps:

  1. Click Create to associate a IP address for the interface. The IP Address, Routing Instance (Create) form opens.

  2. Configure the parameters as required.

  3. Save the changes and close the form.


Click Next to associate the interface with a physical port. The Select Port form opens.

Select a port. Only A/4 or B/4 ports can be associated with the interface.


Save your changes and close the form.

End of steps