GPS Antenna mount kit
		GO

General

GPS antenna mount kit are available from Andrews in several forms. The standard mount kit (denoted by the letters MS at the end of the part number) contains two separate kits that can be used together or separately in the installation of the mount. These separate kits are the Collar Bracket Mount Kit (part number 602214) and the L-Bracket Mount Kit (part number 602215). Alternatively, any one of these kits may be installed if the user requires. Remaining mount kit material may be retained for later use.

GPS-QBW-26NMS

The GPS-QBW-26NMS is a self-contained GPS antenna and mounting kit. The mounting kit includes a right-hand, circularly polarized antenna that incorporates a 26 dB high-performance, low-noise amplifier as well as mounting hardware for attaching the antenna to a vertical pipe with a 3/4" to 1 1/2" diameter.

Pipe diameter

The L-Bracket Mount Kit will attach the GPS antenna onto a customer supplied vertical pipe of 3/4" to 1 1/2"diameter.

Important!  Before installing any components, ensure that the vertical mounting pipe is of correct diameter and free of any components used in previous installations.

This kit contains two types of mounting brackets. The two mounting brackets can be used together, as a standard mounting kit, or separately as the L-Bracket Mount or Collar Bracket Mount. These three mounting configurations are covered in the following section.

Bracket mount kits parts lists

The following table provides description of the mounting kit parts.

		GO
© Alcatel-Lucent