service command reference
service hierarchy descriptions
This section provides the following service hierarchy descriptions:
configure service command hierarchy
configure
— service
— ies
— interface
— ipv6
— track-mobile
— track-mobile
— ip-reassembly
— monitor-mc-redirect
— steering
— track-mobile
service command descriptions
This section provides the following service command descriptions:
configure service command descriptions
track-mobile
Syntax
- [no] track-mobile
Context
- [Tree] configure service ies interface ipv6 track-mobile
Description
This command attaches the mc-mobile active/standby state to the interface route, so that it can be used to attract traffic to the active MAG-c.
The no form of this command detaches the mc-mobile state from the interface route.
Default
no track-mobile
track-mobile
Syntax
- [no] track-mobile
Context
- [Tree] configure service ies interface track-mobile
Description
This command attaches the mc-mobile active/standby state to the interface route, so that it can be used to attract traffic to the active MAG-c.
The no form of this command detaches the mc-mobile state from the interface route.
Default
no track-mobile
ip-reassembly
Syntax
- ip-reassembly port-name
- no ip-reassembly
Context
- [Tree] configure service vprn interface ip-reassembly
Description
This command configures the virtual ISA used for IP reassembly on this interface.
The no form of this command removes the configuration.
Default
no ip-reassembly
Parameters
- port-name
- Specifies the port name.
monitor-mc-redirect
Syntax
- monitor-mc-redirect high-threshold high-threshold low-threshold low-threshold
- no monitor-mc-redirect
Context
- [Tree] configure service vprn interface monitor-mc-redirect
Description
This command configures to monitor traffic on the interface for the mc-redirect tunnel.
The no form of this command reverts to the default.
Default
monitor-mc-redirect high-threshold 1000 low-threshold 500
Parameters
- high-threshold
- Specifies the high threshold value in number of packets.
- low-threshold
- Specifies the low threshold value in number of packets.
steering
Syntax
- steering{ul-from-gw | dl-from-sfc}
Context
- [Tree] configure service vprn interface steering
Description
This command enables the steering function based on the direction of the user traffic flow and connectivity to peering nodes.
Parameters
- ul-from-gw
- Keyword to configure the interface between a standalone SSG and PGW/GGSN. The ul-from-gw keyword enables the source IP-based packet processing for uplink user traffic received from the PGW/GGSN. User traffic received from the PGW/GGSN is processed on the anchor ISM-MG card. Source IP-based packet processing allows locating the anchor ISM-MG card on IOM.
- dl-from-sfc
- Keyword to configure the interface between a standalone SSG node (or PGW/GGSN combined with SSG) and the service function chain (SFC). The dl-from-sfc keyword enables packet processing for downlink user traffic received from SFC. User traffic received from the SFC is processed on the anchor ISM-MG card. To avoid sending user traffic from the ISM-MG back to the SFC, a flag is required to indicate that the SFC is done and user traffic must be forwarded based on the destination IP address.
track-mobile
Syntax
- [no] track-mobile
Context
- [Tree] configure service vprn interface track-mobile
Description
This command attaches the mc-mobile active/standby state to the interface route, so that it can be used to attract traffic to the active MAG-c.
The no form of this command detaches the mc-mobile state from the interface route.
Default
no track-mobile