service command reference

service command descriptions

This section provides the following service command descriptions:

configure service command descriptions

track-mobile

Syntax
  • [no] track-mobile
Context
  • [Tree] configure service ies interface ipv6 track-mobile
Description

This command attaches the mc-mobile active/standby state to the interface route, so that it can be used to attract traffic to the active MAG-c.

The no form of this command detaches the mc-mobile state from the interface route.

Default

no track-mobile

track-mobile

Syntax
  • [no] track-mobile
Context
  • [Tree] configure service ies interface track-mobile
Description

This command attaches the mc-mobile active/standby state to the interface route, so that it can be used to attract traffic to the active MAG-c.

The no form of this command detaches the mc-mobile state from the interface route.

Default

no track-mobile

ip-reassembly

Syntax
  • ip-reassembly port-name
  • no ip-reassembly
Context
  • [Tree] configure service vprn interface ip-reassembly
Description

This command configures the virtual ISA used for IP reassembly on this interface.

The no form of this command removes the configuration.

Default

no ip-reassembly

Parameters
port-name
Specifies the port name.
Values: port-id [:context-val] where
  • port-id

    Specifies the configured port ID.

    Values: slot/mda/port or lag-id where

    id – 1 to 200

  • context-val – 1 to 31

monitor-mc-redirect

Syntax
  • monitor-mc-redirect high-threshold high-threshold low-threshold low-threshold
  • no monitor-mc-redirect
Context
  • [Tree] configure service vprn interface monitor-mc-redirect
Description

This command configures to monitor traffic on the interface for the mc-redirect tunnel.

The no form of this command reverts to the default.

Default

monitor-mc-redirect high-threshold 1000 low-threshold 500

Parameters
high-threshold
Specifies the high threshold value in number of packets.
Values: 0 to 4294967295
low-threshold
Specifies the low threshold value in number of packets.
Values: 0 to 4294967295

steering

Syntax
  • steering{ul-from-gw | dl-from-sfc}
Context
  • [Tree] configure service vprn interface steering
Description

This command enables the steering function based on the direction of the user traffic flow and connectivity to peering nodes.

Parameters
ul-from-gw
Keyword to configure the interface between a standalone SSG and PGW/GGSN. The ul-from-gw keyword enables the source IP-based packet processing for uplink user traffic received from the PGW/GGSN. User traffic received from the PGW/GGSN is processed on the anchor ISM-MG card. Source IP-based packet processing allows locating the anchor ISM-MG card on IOM.
dl-from-sfc
Keyword to configure the interface between a standalone SSG node (or PGW/GGSN combined with SSG) and the service function chain (SFC). The dl-from-sfc keyword enables packet processing for downlink user traffic received from SFC. User traffic received from the SFC is processed on the anchor ISM-MG card. To avoid sending user traffic from the ISM-MG back to the SFC, a flag is required to indicate that the SFC is done and user traffic must be forwarded based on the destination IP address.

track-mobile

Syntax
  • [no] track-mobile
Context
  • [Tree] configure service vprn interface track-mobile
Description

This command attaches the mc-mobile active/standby state to the interface route, so that it can be used to attract traffic to the active MAG-c.

The no form of this command detaches the mc-mobile state from the interface route.

Default

no track-mobile