li command reference

li hierarchy descriptions

This section provides the following Lawful Interception hierarchy descriptions:

configure li command hierarchy

li command descriptions

This section provides the following Lawful Interception command descriptions:

configure li command descriptions

mobile-gateway

Syntax
  • mobile-gateway
Context
  • [Tree] configure li mobile-gateway
Description

Commands in this context configure lawful intercept (LI) functionality for the MAG-c.

3gpp-5g-release

Syntax
  • 3gpp-5g-release release
Context
  • [Tree] configure li mobile-gateway 3gpp-5g-release
Description

This command configures the 3GPP release option used for the 5G LI interfaces.

The no form of this command reverts to the default (base release).

Parameters
release
Specifies the 3GPP release.
Values: rel-base | rel-16
Default: rel-base (Release 15)

3gpp-release

Syntax
  • 3gpp-release release
Context
  • [Tree] configure li mobile-gateway 3gpp-release
Description

This command configures the 3GPP release option used for LI interfaces.

The no form of this command reverts to the default (base release).

Parameters
release
Specifies the 3GPP release.
Values: rel-base | rel-13
Default: rel-base (Release 11)

allow-duplicate-msisdn-or-imei

Syntax
  • [no] allow-duplicate-msisdn-or-imei
Context
  • [Tree] configure li mobile-gateway allow-duplicate-msisdn-or-imei
Description

This command enables LI support for duplicate MSISDN or IMEI.

The no form of this command disables LI support for duplicate MSISDN or IMEI.

client-tls-profile

Syntax
  • client-tls-profile tls-profile-name
  • no client-tls-profile
Context
  • [Tree] configure li mobile-gateway client-tls-profile
Description

This command configures a default client TLS profile on the MAG-c. When the TLS profile is configured, the MAG-c tries to establish a TCP connection with the lawful intercept gateway (LIG) over TLS for the 5G LI X2 interface. The MAG-c supports strict TLS-only mode for the 5G LI X2 interface. Both the MAG-c and the LIG must support TLS.

The no form of this command removes the configuration.

Default

no client-tls-profile

Parameters
tls-profile-name
Specifies the TLS profile name, up to 32 characters.

custom-correlation-id-format

Syntax
  • custom-correlation-id-format {enable | disable}
  • no custom-correlation-id-format
Context
  • [Tree] configure li mobile-gateway custom-correlation-id-format
Description

This command facilitates sending the correlation ID with four octets charging ID (without including the gateway IP address). The correlation ID is included in IRI as well as in CC messages, so that the LIG can correlate IRI and CC messages.

The no form of this command reverts to default (disable).

Parameters
enable
Keyword to send the correlation ID with four octets charging identifier.
disable

Keyword to not send the correlation ID with four octets charging identifier.

Default: disable

df-peer

Syntax
  • df-peer df-peer-id df2-addr ip-address df2-port port [df2-tls-profile profile-name]
  • no df-peer df-peer-id
Context
  • [Tree] configure li mobile-gateway df-peer
Description

This command configures the DF peer of an LI gateway as DF2 (X2) only. It supports the following configuration options:

  • DF2 IP address and port
  • DF2 TLS profile

The no form of this command removes the DF peer information from the configuration.

Parameters
def-peer-id
Specifies the DF peer ID.
Values: 1 to 254
ip-address
Specifies the DF peer IP address where the X2 is sent.
Values:
  • IPv4 address – a.b.c.d
  • IPv6 address – x:x:x:x:x:x:x:x (eight 16-bit pieces) or x:x:x:x:x:x:d.d.d.d

    where

    x – [0..FFFF]H

    d – [0..255]D

port
Specifies the DF port number (TCP/UDP port) where the X2 is sent.
Values: 1 to 65535
Default: 0
profile-name
Specifies the DF profile name, up to 32 characters.
Note:
  • The DF peers can use the same or different TLS client profiles.
  • To use a TLS profile, the TLS protocol must be enabled (using the tls command).

  • The TLS client profiles must be in the administratively disabled (no shutdown) state.

fan-out

Syntax
  • [no] fan-out
Context
  • [Tree] configure li mobile-gateway fan-out
Description

This command enables IRI and IRI+CC fan-out functionality for LI on the mobile gateway. Each target activation must be uniquely identified by the lawful interception ID (LIID) specified using the target command. A maximum of 10 target activations are supported for a UE. There could be, for example, 5 activations using IMSI, 3 activations using MSISDN, and 2 activations using IMEI. A maximum of 7 activations are supported using the same target type (for example, IMSI). Each activation must be deactivated separately using the same LIID used at the time of activation.

The no form of this command reverts to the default.

Default

no fan-out

include-rai

Syntax
  • [no] include-rai
Context
  • [Tree] configure li mobile-gateway include-rai
Description

This command supports the inclusion of the Routing Area Identifier (RAI) from the message level along with the ULI received from the SGSN, within the Location of the Target Information Element that is sent in the IRI messages to the LIG.

The no form of this command reverts to the default.

Default

no include-rai

iri

Syntax
  • iri
Context
  • [Tree] configure li mobile-gateway iri
Description

Commands in this context configure LI IRI settings.

gw-function-iri-mode

Syntax
  • [no] gw-function-iri-mode
Context
  • [Tree] configure li mobile-gateway iri gw-function-iri-mode
Description

This command controls the IRI mode of generating events for a combined 4G SGW/PGW session on the MAG-c. For a combined session, by default, only MAG-c IRI events are generated. When this command is enabled, separate events are generated for the combined session from both the SGW and the PGW function.

The no form of this command reverts to the default (only PGW events are generated for the combined SGW/PGW session).

Default

no gw-function-iri-mode

iri-per-mb-request

Syntax
  • [no] iri-per-mb-request
Context
  • [Tree] configure li mobile-gateway iri iri-per-mb-request
Description

This command enables the additional MBReq event on a MAG-c acting as the SGW.

The no form of this command reverts to the default.

Default

no iri-per-mb-request

te-id

Syntax
  • [no] te-id
Context
  • [Tree] configure li mobile-gateway iri te-id
Description

This command enables the population of the TEID (S5/S8-U PGW F-TEID: TEID+IP address) information element (IE) in a bearer activation IRI event from the SGW or PGW.

The no form of this command disables the population of the TEID IE in the bearer activation IRI event.

Default

no te-id

x2-iri-ice-type

Syntax
  • [no]x2-iri-ice-type
Context
  • [Tree] configure li mobile-gateway iri x2-iri-ice-type
Description

This command enables inclusion of the ICE-Type in GTP signaling-related IRI messages sent by the mobile gateway. Applicable gateway types include SGW, PGW, and combined SGW/PGW.

The no form of this command reverts to the default (ICE-Type is not included in GTP signaling

related IRI messages).

Default

no x2-iri-ice-type

li-x1

Syntax
  • li-x1
Context
  • [Tree] configure li mobile-gateway li-x1
Description

Commands in this context configure LI_X1 interface settings.

admf-peer

Syntax
  • admf-peer df-peer-id admf-addr admf-peer-address [x1-port x1-port-num]
  • no admf-peer df-peer-id
Context
  • [Tree] configure li mobile-gateway li-x1 admf-peer
Description

This command configures the administration function (ADMF) peer IP address, and optionally a port if other than the default value of 443 is used.

The no form of this command removes the specified ADMF peer.

Parameters
df-peer-id
Specifies the peer ID.
Values: 1 to 254
admf-peer-address
Specifies the peer IP address.
Values:
  • IPv4 address – a.b.c.d
  • IPv6 address – x:x:x:x:x:x:x:x (eight 16-bit pieces) or x:x:x:x:x:x:d.d.d.d

    where

    x – [0..FFFF]H

    d – [0..255]D

x1-port-num
Specifies the port number.
Values: 1 to 65535
Default: 443

alpn

Syntax
  • alpn {enable | disable}
Context
  • [Tree] configure li mobile-gateway li-x1 alpn
Description

This command enables or disables the Application Layer Protocol Negotiation (ALPN) extension handling for TLS over the LI_X1 interface.

Default

alpn enable

li-x1-keep-alive-time-p2

Syntax
  • li-x1-keep-alive-time-p2 x1-time-p2-value
  • no li-x1-keep-alive-time-p2
Context
  • [Tree] configure li mobile-gateway li-x1 li-x1-keep-alive-time-p2
Description

This command specifies the keep-alive time for the LI_X1 interface. If the timer is set to zero, the keep-alive mechanism is disabled.

The no form of this command reverts to the default.

Default

li-x1-keep-alive-time-p2 0

Parameters
x1-time-p2-value
Specifies the keep-alive time in seconds.
Values: 0 | 3600 to 86400; 0 disables the keep-alive mechanism.
Default: 0

li-x1-local-interface

Syntax
  • li-x1-local-interface ip-address [router router-instance] [local-port port-num]
  • no li-x1-local-interface
Context
  • [Tree] configure li mobile-gateway li-x1 li-x1-local-interface
Description

This command configures the IP address for the LI_X1 local end point.

Default

no li-x1-local-interface

Parameters
ip-address
Specifies the IP address.
Values:
  • IPv4 address – a.b.c.d
  • IPv6 address – x:x:x:x:x:x:x:x (eight 16-bit pieces) or x:x:x:x:x:x:d.d.d.d

    where

    x – [0..FFFF]H

    d – [0..255]D

router-instance
Specifies the router instance, up to 32 characters.
Default: base
port-num
Specifies the port number.
Values: 1 to 65535
Default: 443

sni

Syntax
  • sni {enable | disable}
Context
  • [Tree] configure li mobile-gateway li-x1 sni
Description

This command enables or disables the Service Name Indication (SNI) extension handling for TLS over the LI_X1 interface.

The no form of this command reverts to default.

Default

sni enable

li-x2

Syntax
  • li-x2
Context
  • [Tree] configure li mobile-gateway li-x2
Description

Commands in this context configure LI_X2 interface settings.

li-x2-keep-alive-time-p1

Syntax
  • li-x2-keep-alive-time-p1 x2-time-p1-value
  • no li-x2-keep-alive-time-p1
Context
  • [Tree] configure li mobile-gateway li-x2 li-x2-keep-alive-time-p1
Description

This command specifies the keep-alive time for the LI_X2 interface on the MAG-c acting as the SMF. The POI sends a keepalive PDU at least everyx2-time-p1-value seconds (the default is 60 seconds). If the POI does not receive a keep-alive Acknowledgment PDU within the number of seconds specified for x2-time-p2-value, it disconnects the connection and attempts to reconnect to the MDF while reporting an error through the X1 interface as defined in ETSI TS 103 221-1. The default x2-time-p2-value is 180 seconds and it can be modified using the li-x2-keep-alive-time-p2 command.

The no form of this command reverts to the default. If the timer is set to 0 value, the keep-alive mechanism is disabled.

Parameters
x2-time-p1-value
Specifies the keep-alive time, in seconds.
Values: 0 to 300
Default: 60

li-x2-keep-alive-time-p2

Syntax
  • li-x2-keep-alive-time-p2 x2-time-p2-value
  • no li-x2-keep-alive-time-p2
Context
  • [Tree] configure li mobile-gateway li-x2 li-x2-keep-alive-time-p2
Description

This command specifies the keep-alive time for the LI_X2 interface on the SMF. If the POI does not receive a keep-alive Acknowledgment PDU within the number of seconds specified for x2-time-p2-value (the default is 180 seconds), it disconnects the connection and attempts to reconnect to the MDF while reporting an error through the X1 interface as defined in ETSI TS 103 221-1.

The no form of this command reverts to the default. If the timer is set to 0 value, the keep-alive mechanism is disabled.

Parameters
x2-time-p2-value
Specifies the keep-alive time, in seconds.
Values: 0 to 1800
Default: 180

local-interface

Syntax
  • local-interface ip-address [router router-instance] [override-x2-interface x2-ip-address [x2-router x2-router-instance]]
  • no local-interface
Context
  • [Tree] configure li mobile-gateway local-interface
Description

This command configures the source IP address used by the xGW/GGSN for the LI interface. Specifying the override-x2-interface option enables each X2 interface to use a different VPRN context. When the override-x2-interface option is not specified, the X2 interfaces use the same IP address and VPRN context.

The no form of this command reverts to the default.

Default

no local-interface

Parameters
ip-address
Specifies the source IP address.
Values:
  • IPv4 address – a.b.c.d
  • IPv6 address – x:x:x:x:x:x:x:x (eight 16-bit pieces) or x:x:x:x:x:x:d.d.d.d

    where

    x – [0..FFFF]H

    d – [0..255]D

router-instance
Specifies the router instance, up to 32 characters.
x2-ip-address
Specifies the source X2 IP address.
Values:
  • IPv4 address – a.b.c.d
  • IPv6 address – x:x:x:x:x:x:x:x (eight 16-bit pieces) or x:x:x:x:x:x:d.d.d.d

    where

    x – [0..FFFF]H

    d – [0..255]D

x2-router-instance
Specifies the X2 router instance, up to 32 characters.

nf-id-value

Syntax
  • nf-id-value {uuid | ip-addr | ip-addr-hex-string}
  • no nf-id-value
Context
  • [Tree] configure li mobile-gateway nf-id-value
Description

This command specifies the NF identifier choice of uuid or ip-addr to use for IRI and CC messages over the LI_X1, LI_X2 and LI_X3 interfaces. The ip-addr option specifies to use the configured local source IP address for the LI_X1, LI_X2 and LI_X3 interfaces as the NF identifier in IRI and CC messages respectively.

The no form of this command reverts to the default (uuid).

Default

no nf-id-value

Parameters
uuid
Keyword to use the UUID as the NF identifier in IRI and CC messages.
ip-addr
Keyword to use the local source IP address configured for the LI_X1, LI_X2 and the LI_X3 interfaces as the NF identifiers in the IRI and CC messages respectively.
Default: disable
ip-addr-hex-string
Keyword to use the local source IP address for the LI_X1, LI_X2 and the LI_X3 interfaces, encoded as a hex string (individual digits and the character '.' are converted to the hex form) as the NF identifiers for the IRI and CC messages respectively.
Default: uuid

num-conn-retries

Syntax
  • num-conn-retries num-of-retries
  • no num-conn-retries
Context
  • [Tree] configure li mobile-gateway num-conn-retries
Description

This command is used to specify the number of (TCP) connection retries to the LIG server, before it is deemed to be down.

The no form of this command reverts to the default.

Default

num-conn-retries 3

Parameters
num-of-retries
Specifies the number of retries.
Values: 1 to 10
Default: 3

operator-id

Syntax
  • operator-id id-string
  • no operator-id
Context
  • [Tree] configure li mobile-gateway operator-id
Description

This command configures the operator ID.

Default

operator-id oprId

Parameters
id-string
Specifies the operator ID, up to 5 characters.
Default: oprId

per-bearer-seq-num

Syntax
  • [no] per-bearer-seq-num
Context
  • [Tree] configure li mobile-gateway per-bearer-seq-num
Description

This command generates a new sequence number (correlation number) for every new bearer.

The no form of the command disables generation of the sequence number.

Default

no per-bearer-seq-num

server-tls-profile

Syntax
  • server-tls-profile tls-profile-name
  • no server-tls-profile
Context
  • [Tree] configure li mobile-gateway server-tls-profile
Description

This command configures the default server TLS profile for the MAG-c lawful intercept X1 interface.

The no form of this command removes the server TLS profile configuration.

Default

no server-tls-profile

Parameters
tls-profile-name
Specifies the TLS profile name, up to 32 characters.

target

Syntax
  • target target-type id target-value intercept intercept peer df-peer-id [liid liid-string]
  • no target target-type id target-value [liid liid-string]
Context
  • [Tree] configure li mobile-gateway target
Description

This command configures the LI target peer.

The no form of this command removes the specified LI target peer.

Parameters
target-type
Specifies the LI target type.
Values: imsi | msisdn
target-value
Specifies the LI target value.
Values: imsi | msisdn – up to 16 digits
intercept
Specifies that the interception is for IRI only.
Values: iri
df-peer-id
Specifies the peer ID.
Values: 1 to 255
liid-string
Specifies the lawful intercept ID (LIID), up to 25 characters.

tls

Syntax
  • [no] tls
Context
  • [Tree] configure li mobile-gateway tls
Description

This command enables the TLS protocol in the LI X2 and X3 interfaces. To enable the TLS protocol, make sure that following conditions apply:

  • a valid client TLS profile is configured and administratively enabled (not shutdown) in all DF peers
  • the X3 interface is using TCP as the transport option

The no form of this command reverts to the default.

Default

no tls

x2-iri-cache-size

Syntax
  • x2-iri-cache-size cache-size
  • no x2-iri-cache-size
Context
  • [Tree] configure li mobile-gateway x2-iri-cache-size
Description

This command is used to specify the size of the IRI buffer cache. (IRI messages buffered when connectivity to the LIG is down). Setting the cache size to a value of 0 disables buffering.

The no form of this command reverts to the default.

x2-iri-qos

Syntax
  • x2-iri-qos dscp {dscp-value | dscp-name}
  • no x2-iri-qos
Context
  • [Tree] configure li mobile-gateway x2-iri-qos
Description

This command specifies the DSCP to be set for interception related information (IRI) messages sent to a lawful interception gateway (LIG).

The no form of this command reverts to the default.

Parameters
dscp-value
Specifies the value of the DSCP to be set for IRI.
Values: 0 to 63
dscp-name
Specifies the name of the DSCP to be set for IRI.
Values: none | be | ef | cp1 | cp2 | cp3 | cp4 | cp5 | cp6 | cp7 | cp9 | cs1 | cs2 | cs3 | cs4 | cs5 | nc1 | nc2 | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cp11 | cp13 | cp15 | cp17 | cp19 | cp21 | cp23 | cp25 | cp27 | cp29 | cp31 | cp33 | cp35 | cp37 | cp39 | cp41 | cp42 | cp43 | cp44 | cp45 | cp47 | cp49 | cp50 | cp51 | cp52 | cp53 | cp54 | cp55 | cp57 | cp58 | cp59 | cp60 | cp61 | cp62 | cp63
Default: af41

x2-keep-alive-time

Syntax
  • x2-keep-alive-time keep-alive-time
  • no x2-keep-alive-time
Context
  • [Tree] configure li mobile-gateway x2-keep-alive-time
Description

This command configures the keep-alive time for the X2 interface. An LI message including a keep-alive parameter is sent to the LIG when no LI message has been sent for the configured amount of time (for example, five minutes), indicating to the LIG that the LI connection is still up.

The no form of this command reverts to the default. A value of 0 disables the keep-alive mechanism.

Parameters
keep-alive-time
Specifies the keep-alive time in minutes.
Values: 0 to 5
Default: 0

pfcp-li-shared-key

Syntax
  • pfcp-li-shared-key key-value
  • pfcp-li-shared-key key-value hash2
  • no pfcp-li-shared-key
Context
  • [Tree] configure li pfcp-li-shared-key
Description

This command configures the shared key used between the MAG-c and the UP over the Sx/N4 interface. The PFCP IEs are sent from the MAG-c to the SR OS UPs. This is used to encrypt the LI container IE at the MAG-c, and decrypt the LI container IE at the UP.

The no form of this command reverts to the default.

Default

no pfcp-li-shared-key

Parameters
key-value
Specifies the value of the shared key for the Sx/N4 interface, up to 128 characters.
hash2
Keyword to specify hash2.

target

Syntax
  • target name
  • no target
Context
Description

This command configures an LI target name. This name only serves as an alias for the LI target.

The no form of this command removes the LI target configuration.

Parameters
name
Specifies the target name, up to 32 characters.

description

Syntax
  • description description-string
Context
  • [Tree] configure li target description
Description

This command configures a description for the LI target.

Parameters
description-string
Specifies the target description, up to 80 characters.

source

Syntax
  • no source id
  • source id imsi imsi-number [ingress] [egress] [fc fc-name [fc-name… (up to 8 max)]] intercept-id intercept-id session-id session-id [mirror-destination service-name]
  • source id subscriber name [ingress] [egress] [fc fc-name [fc-name...(up to 8 max)]] intercept-id intercept-id session-id session-id mirror-destination service-name
  • source id msisdn msisdn-number [ingress] [egress] [fc fc-name [fc-name… (up to 8 max)]] intercept-id intercept-id session-id session-id [mirror-destination service-name]
Context
  • [Tree] configure li target source
Description

This command configures activation and deactivation of subscriber LI. The MAG-c supports 4G, 5G, and BNG subscriber LI.

The no form of this command removes the configuration of the source ID.

Parameters
id
Specifies a target source ID, or a name up to 64 characters; for example, if the target has 4 IMSIs. The imsi-number and id parameters are mutually exclusive. If you are performing LI on a wireline (BNG) subscriber, use the subscriber keyword.
Value: 1 to 4
imsi-number
Specifies an IMSI or SUPI number. The imsi-number and the id parameters are mutually exclusive. If you perform LI on a 4G or 5G wireless subscriber, use the imsi keyword.
Values: 10 to 15
name

Specifies the subscriber name, up to 64 characters.

ingress
Keyword to specify the ingress source.
egress
Keyword to specify the egress source.
fc-name
Specifies the FC type.
Values: be | l2 | af | l1 | h2 | ef | h1 | nc
intercept-id
Specifies the intercept ID.
Values: 1 to 1073741823
session-id
Specifies the session ID.
Values: 1 to 4294967295
service-name
Specifies the service name, up to 64 characters.
msisdn-number
Specifies the Mobile Station International Subscriber Directory Number (MSISDN).
Values: 9 to 15

show li command descriptions

mobile-gateway

Syntax
  • mobile-gateway
Context
  • [Tree] show li mobile-gateway
Description

Commands in this context display LI information.

df-peer

Syntax
  • df-peer ip-addr ip-address | ipv6-address
  • df-peer [df-peer-id]
Context
  • [Tree] show li mobile-gateway df-peer
Description

This command displays only information about the 4G delivery function (DF) peer.

Parameters
ip-address | ipv6-address
Specifies the DF peer IP address.
Values:
  • ip-address – a.b.c.d
  • ipv6-address – x:x:x:x:x:x:x:x (eight 16-bit pieces) or x:x:x:x:x:x:d.d.d.d

    where

    x – [0..FFFF]H

    d – [0..255]D

df-peer-id
Specifies the DF peer ID.
Values: 1 to 254

summary

Syntax
  • summary
Context
  • [Tree] show li mobile-gateway summary
Description

This command displays a summary of the LI information.

target

Syntax
  • target [target-type] [id target-value] [liid liid-string]
  • target target-type id target-value detail
  • target target-type id target-value stats
Context
  • [Tree] show li mobile-gateway target
Description

This command displays only information about the 4G LI target type and value.

Parameters
target-type
Keyword that specifies the target type.
Values: imsi | imei | msisdn | mac | nai
target-value
Specifies the target value.
Values:
  • imsi | imei | msisdn

    up to 16 digits

  • mac – xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx

  • nai – username@realm

    up to 253 characters

detail
Keyword to display detailed information for the LI target context.
liid-string
Specifies the LI ID string for the target, up to 24 characters.
stats
Keyword to display statistics for the LI target context.
Output

The following output examples display configuration and statistics information for LI targets.

LI target information
# show li mobile-gateway target 
===============================================================================
LI Target Information
===============================================================================
Target id (imsi)       : 206010000000004
Intercept type         : iri            Df peer            : 6
Li ID                  : 40
Sec Df Peer            : 0              HA Df peer         : 0
-------------------------------------------------------------------------------
Target id (msisdn)     : 8801812300005
Intercept type         : iri            Df peer            : 6
Li ID                  : 200
Sec Df Peer            : 0              HA Df peer         : 0
-------------------------------------------------------------------------------
Number of targets : 2
===============================================================================
LI target information for a specified IMSI
# show li mobile-gateway target imsi id 206010000000004      
=============================================================================
LI Target Information
=============================================================================                                                                                                                                                                                                                                        
Target id (imsi)       : 206010000000004                           
Intercept type         : iri            Df peer            : 6
Intercept id           : 40
Sec Df Peer            : 0              HA Df peer         : 0
------------------------------------------------------------------------------
Number of targets : 1
==============================================================================
LI target information for a specified MSISDN
# show li mobile-gateway target msisdn id 8801812300005
===============================================================================
LI Target Information
===============================================================================
Target id (msisdn)     : 8801812300005
Intercept type         : iri            Df peer            : 6
Li ID                  : 200
Sec Df Peer            : 0              HA Df peer         : 0
-------------------------------------------------------------------------------
Number of targets : 1
===============================================================================
LI target information for a specified IMSI ID and LI ID
# show li mobile-gateway target imsi id 206010000000004 liid 40 
===============================================================================
LI Target Information
===============================================================================
Target id (imsi)       : 206010000000004
Intercept type         : iri            Df peer            : 6
Li ID                  : 40
Sec Df Peer            : 0              HA Df peer         : 0
-------------------------------------------------------------------------------
Number of targets : 1
===============================================================================
LI target information for a specified MSISDN ID and LI ID
# show li mobile-gateway target msisdn id 8801812300005 liid 200 
===============================================================================
LI Target Information
===============================================================================
Target id (msisdn)     : 8801812300005
Intercept type         : iri            Df peer            : 6
Li ID                  : 200
Sec Df Peer            : 0              HA Df peer         : 0
-------------------------------------------------------------------------------
Number of targets : 1
===============================================================================
LI target statistics for a specified IMSI ID
# show li mobile-gateway target imsi id 206010000000004 stats 
===============================================================================
LI Target Information
===============================================================================
Target id (imsi)       : 206010000000004
Intercept type         : iri            Df peer            : 6
Li ID                  : 40
Sec Df Peer            : 0              HA Df peer         : 0
-------------------------------------------------------------------------------
Start of Interception with active bearer                 : 1
Number of targets : 1
===============================================================================
LI target statistics for a specified MSISDN ID
# show li mobile-gateway target msisdn id 8801812300005 stats    
===============================================================================
LI Target Information
===============================================================================
Target id (msisdn)     : 8801812300005
Intercept type         : iri            Df peer            : 6
Li ID                  : 200
Sec Df Peer            : 0              HA Df peer         : 0
-------------------------------------------------------------------------------
Number of targets : 1
===============================================================================
LI target detailed statistics for a specified IMSI ID
# show li mobile-gateway target imsi id 206010000000004 detail 
===============================================================================
LI Target Information
===============================================================================
Target id (imsi)       : 206010000000004
Intercept type         : iri            Df peer            : 6
Li ID                  : 40
Sec Df Peer            : 0              HA Df peer         : 0
-------------------------------------------------------------------------------
Number of targets : 1
-------------------------------------------------------------------------------
IMSI                   : 206010000000004
IMEI                   : 358505010000040
MSISDN                 : 8801812300004
UE State               : connected      Failure Reason     : noError
Attach Time            : 2024/06/17 19:02:38
ULI Type               : taiAndEcgi     
ULI Time               : N/A
ULI                    : 206-01-4-00015b7
===============================================================================
LI target detailed statistics for a specified MSISDN ID
# show li mobile-gateway target msisdn id 8801812300005 detail 
===============================================================================
LI Target Information
===============================================================================
Target id (msisdn)     : 8801812300005
Intercept type         : iri            Df peer            : 6
Li ID                  : 200
Sec Df Peer            : 0              HA Df peer         : 0
-------------------------------------------------------------------------------
Number of targets : 1
-------------------------------------------------------------------------------
IMSI                   : 206010000000005
IMEI                   : 358505010000050
MSISDN                 : 8801812300005
UE State               : connected      Failure Reason     : noError
Attach Time            : 2024/06/17 20:35:30
ULI Type               : taiAndEcgi     
ULI Time               : N/A
ULI                    : 206-01-5-00015b8
===============================================================================