Workflow to configure and manage Wavence device objects

Workflow sequence

The following workflow describes the sequence of high-level tasks required to configure and manage Wavence device objects; see the “Device object configuration” chapter in the NSP NFM-P Classic Management User Guide for the generic procedures that apply to this device type. Also, configure the following device-specific tasks and functions.

Process


1	Configure the system settings for a Wavence device; see To configure the system settings on a Wavence.
2	Remove any inconsistencies created due to MIB population failures that can occur during service creation on a Wavence NE; see To resolve Wavence MIB inconsistencies.
3	Update the software activation status for Wavence SA nodes; see To update the software activation status for Wavence SA nodes.
4	Configure a scope of command role for Wavence element manager access; see To configure a scope of command role for NEtO access.
5	Start the Wavence external element manager from NFM-P GUI; see To cross-launch NEtO from NFM-P.
6	As required, review the specific network management features or functions that can be performed on Wavence devices using either NFM-P GUI or using a craft tool such as NEtO.