Chapter 12: Device object configuration
Workflow to manage device objects
Workflow to configure UNP 802.1x at port level for OmniSwitch devices
General device configuration procedures
To configure NE custom properties
To create an operational group
To configure a 7210 SAS operational group
To enable and configure global Cflowd sampling on an NE
To enable the automatic selection of an RD on an NE
To configure a Service MAC list
To add a span of control to an NE
To configure proxy ARP and proxy node discovery for an NE
To configure a node discovery profile on an NE
To configure an exclusive policy editing restriction on an NE
To configure active card alarms on an NE
To configure the BFD flap detection interval on an NE
To enable a Q in Q untagged SAP on an NE
To configure DHCPv6 Advertise messages on an NE
To configure Python script protection on an NE
To configure home LAN extension functionality on an NE
To configure ISA service chaining on an NE
To configure optimized HTTP redirects on an NE
To configure ANYsec encryption on an NE
To create a chassis-level PBB configuration
To configure serving network information on an NE
To configure WLAN GW redundancy on an NE
To configure call-trace debug storage on an NE
To configure the RADIUS CoA port on an NE
To configure data persistence on an NE
To configure DNS security extensions
To enable or disable ICMP extensions on a NE
To configure a PPPoE Intermediate Agent on an NE
To configure satellite file transfer
To configure the Sender-ID TLV of a CFM PDU for an NE
To configure the global EVPN proxy ARP and node discovery on an NE
To configure a no-service loopback port on the 7210 SAS
To configure CFM DMM version 1 interoperability on the 7210 SAS
To configure two WRED slopes on a 7210 SAS
To configure frame-based accounting for QoS policies on a 7210 SAS
To configure the global system resource profile on a 7210 SAS or 7250 IXR
To configure chassis MAC address on the 7210 SAS-S/Sx VC
To configure port-based scheduling on the 7210 SAS
To configure buffer management for the 7210 SAS
To configure 7210 SAS-R device properties for MVPN
To configure IP fragmentation for 7210 SAS
To configure forwarding path options or resource allocation on a 7250 IXR
To configure policer allocation
To configure watermark settings on a 7705 SAR
To configure QoS ingress aggregate rates on the 7705 SAR-M/ME
To launch an MCT on a Wavence SA NE connected to a 7705 SAR
To start and stop a Webview or Secure Webview session on an OmniSwitch
To configure the dying gasp alarm on an OmniSwitch
To configure shelf craft port IP address on an 1830 VWM device
To configure an Auto-ID range for policies
To enable USB support on a 7250 IXR
To globally enable or disable Packet Byte Offset on a 7250 IXR
To configure GNSS receiver functions on supported IXR and SR NEs
To configure an UNP at port-level
To configure DHCPv6 snooping on an NE
To configure the log encryption key
Ring group configuration procedures