How do I configure an e-mail server for notifications?

Purpose

Use this procedure to configure connection information for an e-mail server. The e-mail feature may be used to contact NSP users or send alarm notifications as configured in an alarm policy. It can also be used to send an automatic e-mail message to users if their account has been locked.

Steps
 
1 

Sign in to the NSP as an administrator.

2 

On the NSP banner bar, click User, Settings.

3 

Click E-mail Server Configuration on the navigation panel.

4 

Configure the parameters listed in the following table.

Parameters

Notes

E-mail server address

IPv4 address, hostname, or FQDN of e-mail server

An e-mail server with an IPv6 address must use a hostname or FQDN.

A hostname or FQDN must be DNS resolvable.

Port number

TCP listening port on e-mail server

E-mail address

Sending e-mail address of e-mail notifications

Username and Password

Authentication credentials for e-mail server

Protocol

E-mail authentication protocol

The SMTP option is unsecure. In order to enable secure e-mail notifications using the SMTPS or STARTTLS option, you must:

  • Ensure that the required TLS certificate is in the /opt/nsp/NSP-CN-DEP-release-ID/NSP-CN-release-ID/tls/securemail directory.

  • Run the NSP installer to install the certificate.

Account Lock Email

Enable to send an automated e-mail message to users whose accounts have been locked.

Account Lock Email Subject

The Subject line of the account lockout e-mail message

Account Lock Email Body

The body text of the account lockout e-mail message

5 

The TEST and TEST EMAIL TO CURRENT USER functions are highlighted when the e-mail server configuration is updated.

Perform one or more of the following, as required.

  1. To send a test message to the specified e-mail server and address, click TEST.

  2. Click TEST EMAIL TO CURRENT USER to send a test message to the currently logged in user. Such an action is recommended to verify successful e-mail delivery before turning on the global Verify Email setting in Users and Security.

6 

Click Save when you have finished changing settings.

End of steps