VPLS access interface management procedures

---

To create a VPLS or MVPLS L2 access interface

To configure LAG per-link hashing on a VPLS L2 access interface

To assign QoS policies or to enable a MAC override address to a VPLS or MVPLS L2 access interface

To assign ingress and egress QoS policies to a VPLS L2 access interface on a 7210 SAS site

To configure scheduling on an L2 access interface

To configure BPDU Termination, STP, and FIB parameters for the VPLS L2 access interface

To assign a DoS protection policy or DDoS protection policy to the VPLS L2 access interface

To configure residential subscriber management for the VPLS L2 access interface

To configure an Ethernet tunnel on a VPLS L2 access interface

To configure a redundant VLAN range on a VPLS L2 access interface

To configure IGMP snooping for a VPLS L2 access interface

To configure the ARP host for the VPLS L2 access interface

To configure DHCP for the VPLS L2 access interface

To configure MVR for a VPLS L2 access interface

To configure anti-spoofing filters for a VPLS L2 access interface

To create MIPs and MEPs on a VPLS L2 access interface

To assign an ANCP policy to a VPLS L2 access interface

To configure PIM snooping on a VPLS L2 access interface

To configure MLD snooping for a VPLS L2 access interface

To configure MVR (MLD) for a VPLS L2 access interface

To create a VPLS or MVPLS B-L2 access interface

To create a VPLS I-L2 access interface

To configure ETree on a VPLS L2 access interface

To configure DHCPv6 snooping for a VPLS or MVPLS L2 access interface