To create and run a VPRN ping or VPRN trace OAM diagnostic test from the STM
Steps
1 |
Choose Tools→Service Test Manager (STM) from the NFM-P main menu. The Service Test Manager form opens. |
2 |
Click Create and choose L3 Service→VPRN Ping or VPRN Trace. The VPRN Ping (Create) form or VPRN Trace (Create) opens. |
3 |
Configure the required parameters. |
4 |
Select a VPRN site In the Test Object Panel. |
5 |
Click on the Test Parameters tab. |
6 |
Configure the parameters in the Execution Details panel. |
7 |
Configure the parameters in the Test Probe panel. The Time To Live parameter only applies to VPRN ping tests. The Initial Time to Live, DiffServ Field and Maximum Time to Live parameters only apply to VPRN trace tests. |
8 |
Click on the NM Thresholds tab to configure threshold-crossing alarms. See To configure threshold-crossing alarms or NM threshold-crossing alarms for an OAM diagnostic test or STM test policy for more information. |
9 |
Save the changes and close the forms. |
10 |
To run the OAM diagnostic test and view the results, perform To run one or more OAM diagnostic tests from the STM and view the test results . See To interpret OAM diagnostic test results on the STM for information about how to interpret the test results. End of steps |