To create and run a MPLS LDP tree trace OAM diagnostic test from the STM
Steps
1 |
Choose Tools→Service Test Manager (STM) from the NFM-P main menu. The Service Test Manager form opens. |
2 |
Click Create and choose MPLS→LDP Tree Trace. The LDP Tree Trace (Create) form opens. |
3 |
Configure the required parameters. |
4 |
Click on the Test Parameters tab and configure the required parameters. |
5 |
Click on the Results Configuration tab and configure the required parameters. |
6 |
As required, click on the NM Thresholds tab to configure threshold-crossing alarms. Note: The NM Thresholds tab will only be displayed and configurable when the NE Schedulable parameter is not enabled. See To configure threshold-crossing alarms or NM threshold-crossing alarms for an OAM diagnostic test or STM test policy for more information. |
7 |
Save the changes and close the forms. |
8 |
To run the OAM diagnostic test and view the results, perform To run one or more OAM diagnostic tests from the STM and view the test results . See To interpret OAM diagnostic test results on the STM for information about how to interpret the test results. End of steps |