Node Health Summary (NSP) report

Node Health Summary (NSP) report overview

The Node Health Summary (NSP) report differs from the Node Health Summary report by including availability data for NEs managed by the NFM-P only, MDM (model-driven Nokia) only, or NFM-P+MDM-mediated NEs. The report shows a summary of temperature, CPU, and memory utilization data for available NEs.

If no telemetry subscriptions are enabled for CPU, Memory, and Temperature, the report shows -1 values for CPU and Memory and N/A for Temperature.

If the NE is part of more than one subregion, any one entry displays randomly.

If classic node is managed in NSP, node will get automatically managed in NFM-P. In this case, duplicates regions will be shown. One will display the NFM-P contents and another one is common for both NFM-P and NSP.

Use cases

Equipment health monitoring—Ensure the network equipment is operating within anticipated ranges for temperature, memory, and CPU utilization.

Prerequisites

The following table describes the aggregation rules that must be enabled and telemetry subscriptions that must be configured for the NEs on which statistics are to be collected. The aggregation rules must be enabled to view the report for granularities other than raw data; see How do I configure analytics aggregation?. Enable aggregation and configure telemetry subscriptions; see the Telemetry information on the Network Developer Portal and the NSP Data Collection and Analysis Guide.

Table 16-4: Node Health Summary (NSP) report prerequisites for NSP statistics

Aggregator name

Monitored object class

Statistics class

Statistics collection

NE types

md-aggr:/md-aggr-base/telemetry-system-info/system

Card

Memory pool

Shelf

telemetry:/base/system-info/system

Telemetry statistics

7250 IXR-6e

(SRL)

7750 MD SR

Classic NE with gRPC telemetry collection enabled

Cisco NCS 7.6.2

Juniper VMX JUNOS 21.4R1.12

md-aggr:/md-aggr-base/telemetry-hardware/temperature

Card

Port

Shelf

telemetry:/base/hardware/temperature

Telemetry statistics

7250 IXR-6e

(SRL)

7750 MD SR

Classic NE with gRPC telemetry collection enabled

Cisco NCS 7.6.2

Juniper VMX JUNOS 21.4R1.12

Table 16-5: Node Health Summary (NSP) report prerequisites for NFM-P statistics

Aggregator name

Monitored object class

Statistics class

Statistics collection

MIB name

NE types

System CPU Usage Stats Aggregator

equipment.SystemStatsHolder

equipment.SystemCpuStats

Performance statistics

TIMETRA-SYSTEM-MIB.sgiCpuUsage

7210 SAS

7210 IXR

7705 SAR

7705 SAR Hm

7750 SR

System Memory Stats Aggregator

equipment.SystemStatsHolder

equipment.System MemoryStats

Performance statistics

TIMETRA-SYSTEM-MIB.sgiMemoryUsed

7210 SAS

7210 IXR

7705 SAR

7705 SAR Hm

7750 SR

Allocated Memory Stats Aggregator

equipment.SystemStatsHolder

equipment.AllocatedMemoryStats

Performance statistics

TIMETRA-SYSTEM-MIB.sgiMemoryPoolAllocate

7210 SAS

7210 IXR

7705 SAR

7705 SAR Hm

7750 SR

Available Memory Stats Aggregator

equipment.SystemStatsHolder

equipment.AvailableMemoryStats

Performance statistics

TIMETRA-SYSTEM-MIB.sgiMemoryAvailable

7210 SAS

7210 IXR

7705 SAR

7705 SAR Hm

7750 SR

Hardware Temperature Stats Aggregator

equipment.BaseCard

equipment.CardSlot

equipment.CCM

equipment.FanTray

equipment.ControlProcessor

equipment.DaughterCard

equipment.MCCard

equipment.PowerSupplyTray

equipment.Shelf

equipment.SwitchFabricProcessor

equipment.XioCard

equipment.HardwareTemperature

Performance statistics

TIMETRA-CHASSIS-MIB.tmnxHwEntry

7210 SAS

7210 IXR

7705 SAR

7705 SAR Hm

7750 SR

Omnisystem NEs

Report characteristics

The following table lists the principal report characteristics.

Table 16-6: Node Health Summary (NSP) report characteristics

Characteristic

Value

Data type

Statistics

Source database

Auxiliary database

Report inputs

Prompt

Notes

End date

Calendar date or relative date (for example, two days ago) and time

Report range

Length of time to be reported, in minutes (minutes, min), hours (hours, h), days (days, d), weeks (w), or months (months, m)

Granularity

Aggregation types:

  • None (raw data)

  • Hourly

  • Daily

  • Weekly

  • Monthly

Region

Select a region.

Subregion

Only subregions below the top-level region are displayed in the prompt. Objects in the lower subregions are automatically selected when their subregion is selected.

Logo Resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Show report output on one page

Select the check box to enable pagination.

Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.

Drill-down support

Yes—Click on a KPI in a table cell to launch the Details report

Example

The following figure shows a report example. The table below is a single table, but is separated due to its width.

Figure 16-2: Node Health Summary (NSP) report
Node Health Summary (NSP) report
Node Health Summary (NSP) report
Node Health Summary (NSP) report
Node Health Summary (NSP) report