Node Health Summary report

Node Health Summary report overview

The Node Health Summary report shows a summary of temperature, CPU, and memory utilization data for available NEs.

If no telemetry subscriptions are enabled for CPU, Memory, and Temperature, the report shows -1 values for CPU and Memory and N/A for Temperature.

Use cases

Equipment health monitoring—Ensure the network equipment is operating within anticipated ranges for temperature, memory, and CPU utilization.

Limitations

Report limitations include:

Prerequisites

The following table describes the aggregation rules that must be enabled and the file and accounting policies that must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring file and accounting policies. To view the report for granularities other than raw data, the aggregation rules must be enabled; see How do I configure analytics aggregation?.

Table 11-8: Node Health Summary report prerequisites

Aggregator name

Monitored object class

Statistics class

Statistics collection

MIB name

NE types

equipment_SystemCpu StatsLogRecord

equipment.BaseCard

equipment.HardwareTemperature

MIB-based

TIMETRA-CHASSIS-MIB.tmnxHwEntry

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

7250 IXR

7705 SAR

7705 SAR-H

7750 SR

equipment_Hardware TemperatureLogRecord

equipment.ControlProcessor

equipment.HardwareTemperature

MIB-based

TIMETRA-CHASSIS-MIB.tmnxHwEntry

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

7250 IXR

7705 SAR

7705 SAR-H

7750 SR

equipment_SystemMemory StatsLogRecord

equipment.DaughterCard

equipment.HardwareTemperature

MIB-based

TIMETRA-CHASSIS-MIB.tmnxHwEntry

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

7250 IXR

7705 SAR

7705 SAR-H

7750 SR

equipment_AllocatedMemory StatsLogRecord

equipment.SystemStatsHolder

equipment.SystemCpuStats

MIB-based

TIMETRA-SYSTEM-MIB.sgiCpuUsage

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

7250 IXR

7705 SAR

7705 SAR-H

7750 SR

equipment_AvailableMemory StatsLogRecord

equipment.SystemStatsHolder

equipment.SystemMemoryStats

MIB-based

TIMETRA-SYSTEM-MIB.sgiMemoryUsed

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

7250 IXR

7705 SAR

7750 SR

Note: 7705 SAR-H is not supported. Memory Usage is calculated as follows:

Memory Usage =(systemMemoryUsageInKb/(allocatedMemoryInKb+availableMemoryInKb)*100

For SAR-H NEs, the available memory statistics are not supported; the calculation is as follows:

Memory Usage =(systemMemoryUsageInKb/(allocatedMemoryInKb)*100

Report characteristics

The following table lists the principal report characteristics.

Table 11-9: Node Health Summary report characteristics

Characteristic

Value

Data type

Statistics

Source database

Auxiliary database

Report inputs

Prompt

Notes

End date

Calendar date or relative date (for example, two days ago) and time

Report range

Length of time to be reported, in minutes (minutes, min), hours (hours, h), days (days, d), weeks (w), or months (months, m)

Granularity

Aggregation types:

  • None (raw data)

  • Hourly

  • Daily

  • Weekly

  • Monthly

Region

Subregion

Only subregions below the top-level region are displayed in the prompt. Objects in the lower subregions are automatically selected when their subregion is selected.

Logo Resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Show report output on one page

Select the check box to enable pagination.

Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.

Drill-down support

Yes—Click on a KPI in a table cell to launch the Details report

Example

The following figure shows a report example.

Figure 11-4: Node Health Summary report
Node Health Summary report
Node Health Summary report
Node Health Summary report
Node Health Summary report