SAP Utilization Details report

SAP Utilization Details report overview

The SAP Utilization Details report shows utilization percentage information for an SAP. This report can be launched on its own or as a drill-down of the Service Utilization Details report.

The default display is a set of time series graphs showing multi-axis line charts for the SAP total, ingress, egress, actual throughput, CIR, PIR, and percentage utilization for the selected SAP. Queues, meters, and policers values are also shown.

The report supports the Rate (kbps) rate type, Percent Port, and Percent Local rate types are supported for this report. The report also supports the port limit and local limit, which are the CIR/PIR values configured as percentages

For SR variants, 7705 SAR-Hm, and 7705 SAR-Hmc, the report supports QoS policies, virtual schedulers, queue overrides, policer overrides, and the egress aggregate rate limit.

For the 7210 SAS, the report supports QoS policies, queue/meter overrides, and the egress aggregate rate limit.

For the 7705 SAR, the report supports QoS policies and the egress aggregate rate limit.

It is not mandatory to configure QoS for this report since the default QoS settings apply.

Use cases

Capacity planning—Use the report to examine SAP utilization patterns for planning future capacity requirements.

Limitations

Minimum and maximum throughput aggregation cannot be compared with the minimum and maximum throughput values generated from raw granularity.

Prerequisites

The following table describes the aggregation rules that must be enabled and the accounting policies that must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring an accounting policy. To view the report for granularities other than raw data, the aggregation rules must be enabled; see How do I configure analytics aggregation?.

Table 14-9: SAP Utilization Details report prerequisites

Aggregator name

Monitored object class

Statistics class

Statistics collection

Details

NE types

SAP Interface Stats Aggregator Egress

service.AccessInterface

service.CompleteServiceEgressPacketOctets

Accounting, file, and log policies

completeSvcInEg policy

7705 SAR

7705 SAR-H

7705 SAR Hm

7750 SR

SAP Interface Stats Aggregator Ingress

service.AccessInterface

service.CompleteServiceIngressPacketOctets 

Accounting, file, and log policies

completeSvcInEg policy

7250 IXR-R6

7705 SAR

7705 SAR-H

7705 SAR Hm

7750 SR

Service Egress Octets Aggregator

service.AccessInterface

service.ServiceEgressOctets

Accounting, file, and log policies

svcEgressOctet policy

7210 SAS-D

7210 SAS Dxp

7210 SAS-K

7210 SAS-M

7210 SAS-Mxp

7210 SAS-R

7210 SAS-S/Sx

7210 SAS-T

7210 SAS-X

7705 SAR-H

Note: 7210 SAS-E and 7210 SAS-S/Sx are not supported due to NE limitations.

Service Ingress Octets Aggregator

service.AccessInterface

service.ServiceIngressOctets

Accounting, file, and log policies

svcIngressOctet policy

7210 SAS-D

7210 SAS Dxp

7210 SAS-K

7210 SAS-M

7210 SAS-Mxp

7210 SAS-R

7210 SAS-S/Sx

7210 SAS-T

7210 SAS-X

7705 SAR-H

Report characteristics

The following table lists the principal report characteristics.

Table 14-10: SAP Utilization Details report characteristics

Characteristic

Value

Data type

Statistics

Source database

Auxiliary database

NE types supported

all 7210 SAS variants

all 7250 IXR variants

all 7450 ESS variants

all 7705 SAR variants

all 7750 SR and VSR variants

all 7950 XRS variants

Service types supported

VPRN, VPLS, Epipe, Ipipe, Cpipe

Report inputs

Prompt

Notes

End date

Calendar date or relative date (for example, two days ago) and time

Report range

Length of time to be reported, in minutes (minutes, min), hours (hours, h), days (days, d), or months (months, m)

Granularity

Aggregation types:

  • None (raw data)

  • Hourly

  • Daily

  • Monthly

Name or name pattern for customer

Search using partial names or wildcard (%).

Select individual items or click Select All.

Customer

Name or name pattern for service

Service

Name or name pattern for SAP

SAP

Logo Resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder.

The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Show report output on one page

Select the check box to enable pagination.

Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.

Drill-down support

No

Example

The following figures show report examples.

Figure 14-11: SAP Utilization Details report—Total utilization
SAP Utilization Details report—Total utilization
Figure 14-12: SAP Utilization Details report—Ingress utilization
SAP Utilization Details report—Ingress utilization
Figure 14-13: SAP Utilization Details report—Egress utilization
SAP Utilization Details report—Egress utilization