Top N Packet Drop—Access Ports report
Top N Packet Drop—Access Ports report overview
The Top N Packet Drop—Access Ports report show the top N FECs or queues that are dropping packets. Separate reports are available for access ports and for network ports. The default display is a table showing queue, forwarding class, egress and octet dropped information.
The report can be run for 7210 SAS NEs that do not support forwarding classes. For these NEs, the report displays N/A in the Forwarding Class and Queue columns. For 7210 SAS NEs that do not support egress policies, the statistics displays as -1 and the forwarding class and queue displays as N/A.
For 7750 SR NEs that do not have packet details available, the statistics will display as -1.
It is not mandatory to configure QoS for this report since the default QoS settings apply.
Use cases
SLA monitoring—Use the report to examine traffic drop patterns, to ensure SLAs are met.
Limitations
Minimum and maximum throughput aggregation cannot be compared with the minimum and maximum throughput values generated from raw granularity.
Prerequisites
The following table describes the aggregation rules that must be enabled and the accounting policies that must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring an accounting policy. To view the report for granularities other than raw data, the aggregation rules must be enabled; see How do I configure analytics aggregation?.
Table 14-47: Top N Packet Drop—Access Ports report prerequisites
Aggregator name |
Monitored object class |
Statistics class |
Statistics collection |
Details |
NE types |
---|---|---|---|---|---|
SAP Interface Stats Aggregator Egress |
service.AccessInterface |
service.CompleteServiceEgressPacketOctets |
Accounting, file, and log policies |
completeSvcInEg policy |
7705 SAR 7705 SAR-H 7705 SAR Hm 7750 SR |
SAP Interface Stats Aggregator Ingress |
service.AccessInterface |
service.CompleteServiceIngressPacketOctets |
Accounting, file, and log policies |
completeSvcInEg policy |
7250 IXR-R6 7705 SAR 7705 SAR-H 7705 SAR Hm 7750 SR |
Service Egress Octets Aggregator |
service.AccessInterface |
service.ServiceEgressOctets |
Accounting, file, and log policies |
svcEgressOctet policy |
7210 SAS-D 7210 SAS Dxp 7210 SAS-K 7210 SAS-M 7210 SAS-Mxp 7210 SAS-R 7210 SAS-S/Sx, 7210 SAS-T 7210 SAS-X 7705 SAR-H |
Service Ingress Octets Aggregator |
service.AccessInterface |
service.ServiceIngressOctets |
Accounting, file, and log policies |
svcIngressOctet policy |
7210 SAS-D 7210 SAS Dxp 7210 SAS-K 7210 SAS-M 7210 SAS-Mxp 7210 SAS-R 7210 SAS-S/Sx, 7210 SAS-T 7210 SAS-X 7705 SAR-H |
Report characteristics
The following table lists the principal report characteristics.
Table 14-48: Top N Packet Drop for Access port report characteristics
Example
The following figure shows report examples.