To add a simulated OSPF virtual link


1	Perform To open a scenario to open a simulation topology map.
2	To create an OSPF virtual link, select two routers by pressing the Ctrl key.
3	Right-click on one of the routers and choose Add→OSPF Virtual Link. The Simulated OSPF Virtual Link (Create) form opens with the General tab displayed.
4	Click on the Select button next to the Area ID parameter. The Select OSPF Area - Simulated OSPF Virtual Link form opens.
5	Choose an entry and click on the OK button. The Select OSPF Area - Simulated OSPF Virtual Link form closes. Note: The list includes only area 0.0.0.0. If area 0.0.0.0 does not appear, you must create it.
6	Click on the Select button next to the Transit Area ID parameter. The Select OSPF Area form opens.
7	Specify a filter for the search, if required, and click on the Search button.
8	Choose an entry and click on the OK button. The Select OSPF Area form closes.
9	Configure the parameters: Name Description Administrative State
10	Click on the OK button. The Simulated OSPF Virtual Link (Create) form closes.
11	Click on the Impact Analysis button to analyze the status of the virtual links. End of steps

Use subject to agreed restrictions on disclosure and use.