Contents
Introduction to the NFM-P Control Plane Assurance Manager
Part II. Commissioning and system administration
2. CPAM commissioning configurations
Workflow to commission the CPAM
3. CPAM routine system maintenance
CPAM daily system maintenance workflow
CPAM weekly system maintenance workflow
CPAM monthly system maintenance workflow
To store alarms in an alarm history log and view alarm history logs
To create search filters for CPAM alarms
To create a CPAA backup policy
Topology map management workflow
To open a topology map from the NFM-P main menu
To configure topology window overlay type from the NFM-P main menu
To create user-defined groups on topology maps
To assign a router ID to ISIS routers with no TE router ID
To create a filter for flat maps
To apply a filter to a flat topology map
To filter objects displayed on a topology map
To filter highlighted objects displayed on a topology map
To remove specific references displayed on a topology map
To configure link colors for OSPF areas or ISIS instances
To list objects using a selected link
To list or view object information from a map
To view the legends for a topology map
To configure and view CPAM topology map icon labels
To configure available menu options for IGP administrative domains
To configure a non-routed edge discovery policy
To override a non-routed edge discovery policy for a routing interface
Workflow for MPLS topology map management
To identify missing MPLS/RSVP links
Workflow for topology references
To manage topology references in an IGP administrative domain
Tunnel and service topology highlights
To highlight the shortest path between two IP addresses
To highlight the bidirectional shortest path between two IP addresses
To highlight the shortest path between two IP addresses and highlight LFA path
To highlight the shortest path between two IP addresses, run a ping, and highlight ping test results
To highlight the constrained shortest path between two IP addresses
To highlight the path for the default route from a source
To highlight the network route between two routers
To create a Source Entry Point between Managed PTP Peers to an unmanaged PTP Peer
To highlight PTP Peers in a Sync Domain
To highlight the IPv6 shortest path between two routers
To highlight composite services
To highlight services from the topology map
To highlight a VPRN prefix path
To highlight historical IP paths
To highlight point-to-multipoint LSPs
To highlight point-to-multipoint LSPs from the topology map contextual menu
To perform a highlighted path audit
To manage active highlights on a topology map
To view highlights on a flat map
To use the Configure Info Tables button
To use the Global Info Tables button
To apply an info table configuration to a map object
To apply an info table configuration to a map highlight
Workflow for path and prefix monitoring
To monitor a bidirectional IP network path
To monitor a bidirectional LSP path
To create an IP path monitor between two routers on a topology map
To create a bidirectional IP path monitor from a unidirectional IP path monitor
To create an LSP path monitor from a dynamic LSP
To create LSP path monitors for multiple LSP paths
To create a P2MP LSP path monitor from a P2MP LSP
To create path monitors for multiple service tunnels
To configure BGP monitored prefixes
To configure the size constraint limit for path monitor records
To view historical path records of a monitored LSP path binding
To view status change history of monitored prefixes
To view the total cost of IP paths and IP path segments
To navigate to a dynamic LSP on a topology map
To navigate to a monitored path on a topology map
To find the cause event of an IP or LSP path record
To find the cause event of a path record of a service tunnel
To find the IP or LSP path monitor record associated with a cause event
To sort IP path records by error code
To sort LSP path records by error code
To sort LSP path records by last reroute cause
To create an IGP prefix list filter
To retrieve a filtered IGP prefix list
To create a BGP prefix list filter
To retrieve a filtered BGP prefix list
To cancel an ongoing retrieval
To configure an IGP administrative domain
To create a BGP confederation AS
To add a BGP sub-AS to a confederation AS
To deploy a CPAA to monitor a BGP AS
To retrieve BGP information from a CPAA
To view discovered ASN information
To view RT retrieval information
To view corrupted BGP update records
To view CPAA update times information
To navigate to PE routers advertising an RT on a topology map
To highlight advertising routers for BGP prefixes
Sample BGP network statistics configuration
To manage a specific MIB policy for BGP statistics collection
To create a retention policy for BGP statistics
To configure the global parameters for statistics graphing
To configure and plot a statistics graph
Workflow for BGP route profiles configuration
To configure a BGP route profile to receive JMS-CPAM topic notifications
To configure a BGP route profile to raise an unreachable prefix alarm
To retrieve a filtered BGP prefix list from a BGP route profile
To configure BGP event retrieval from a BGP route profile
To associate a VPRN service with a BGP route profile
To associate a BGP route profile with a VPRN service
IP, LSP, and P2MP LSP path test policies
Global Info tables on highlighted OAM results
To create an IP path test policy
To create a P2MP LSP test policy
To configure an OAM test execution policy
To manually run an OAM diagnostic on an IP, LSP, or P2MP path monitor
To view OAM test results of an IP, LSP, or P2MP path monitor
To highlight the results of a multicast trace OAM diagnostic on a topology map
To highlight the results of an LSP trace OAM diagnostic on a topology map
To highlight the results of an ICMP route trace OAM diagnostic on a topology map
Workflow for root cause analysis
To configure next hop highlighting
Workflow for RCA audit policies
To perform an RCA audit on an ISIS configuration in an IGP administrative domain
To perform an RCA audit on an OSPF area in an IGP administrative domain
To view completed RCA audit results
To highlight the results of an OSPF RCA audit on a topology map
To highlight the results of an ISIS RCA audit on a topology map
Threshold reaching alarms overview
Workflow for threshold reaching alarms
To view and configure alarm types
Monitoring the multicast network
Workflow for multicast manager
To automatically populate a multicast group
To resync the multicast network
To open the multicast topology view
To view the IGP link associated with a PIM interface
To view candidate RP information
To view anycast RP information
To view multicast group information for a PIM domain
To highlight routers with mismatched RP tables
To highlight routers with mismatched elected BSRs
To highlight the multicast tree
To highlight routers for a multicast group or mask
To highlight active sources for a group
To perform a highlighted multicast path audit
To view the legend for a topology map
To configure an IGP impact analysis
To configure IGP history from the IGP topology map
To configure IGP event retrieval
To compare checkpoints on an IGP history topology map
To configure a historical BGP impact analysis
To configure the BGP event manager
To configure BGP event retrieval
To configure a VPRN BGP impact analysis
To configure a service impact analysis
To view specific topology changes on an IGP history topology map
To configure a composite service impact analysis
To configure OSPF checkpoints in an IGP administrative domain
To create checkpoints from an OSPF topology map
To configure ISIS checkpoints in an IGP administrative domain
To create checkpoints from an ISIS topology map
To create checkpoints from an IGP topology map
To create an Admin Domain checkpoint schedule policy
To force delete the IGP history
To view OSPF topology checkpoints
To view ISIS topology checkpoints
To view checkpointed topology objects
19. Impact analysis simulation
Impact analysis simulation overview
Workflow for impact analysis simulation
To view the status of an import
To create a simulated OSPF router
To create a simulated OSPF subnet
To add a simulated OSPF virtual link
To create a simulated ISIS router
To create a simulated ISIS subnet
To view simulated IGP network data
To view and configure a simulated OSPF area
To view and configure a simulated OSPF link
To view and configure a simulated OSPF virtual link
To view and configure a simulated OSPF subnet
To view and configure a simulated OSPF router
To view and configure a simulated ISIS link
To view and configure a simulated ISIS routing domain
To view and configure a simulated ISIS subnet
To view and configure a simulated ISIS router
To change the administrative state of a simulated network object
To create a simulated provisioned MPLS path
To simulate the impact of LSP bandwidth changes on link utilization
To import MPLS objects from the NFM-P
To view historical LSP path records
To perform a manual resignal of an LSP
To capture the path of LSP paths associated with an LSP
To monitor a simulated IP path
To delete a simulated network object
To highlight a simulated historical LSP path record
To highlight a simulated LSP path
To highlight a historical simulated IP path record
To view the history of simulation events
To manage impact analysis sessions
XML API objects and configurations overview
Appendix A. CPAM MIB support for GNEs
© 2024 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.