To view simulated IGP network data

General information

Perform this procedure to view configuration information about simulated network objects in a scenario. You can perform this procedure for scenarios that you created from an existing IGP administrative domain, OSPF area, checkpoint, or existing scenario.

Steps
 
1 

Perform To create a scenario to create a scenario or To open a scenario to open an existing scenario.

2 

Right-click on the SIMULATION - IGP Model - Scenario topology map and choose IGP Network Data. The SIMULATION - IGP Model - Scenario form opens.

3 

Perform one of the following:

  1. For an OSPF scenario, choose one of the following objects from the object drop-down menu:

    • Simulated OSPF Area (CPAM: Simulated Topology)

    • Simulated OSPF Link (CPAM: Simulated Topology)

    • Simulated OSPF Virtual Link (CPAM: Simulated Topology)

    • Simulated OSPF Subnet (CPAM: Simulated Topology)

    • Simulated Router (CPAM: Simulated Topology)

    Note: Alternatively, you can right-click on an object on the simulation topology map and choose Properties from the contextual menu. The properties form for the object opens with the General tab displayed.

  2. For an ISIS scenario, choose one of the following from the object drop-down menu:

    • Simulated ISIS Link (CPAM: Simulated Topology)

    • Simulated ISIS Routing Domain (CPAM: Simulated Topology)

    • Simulated ISIS Subnet (CPAM: Simulated Topology)

    • Simulated Router (CPAM: Simulated Topology)

    Note: Alternatively, you can right-click on an object on the simulation topology map and choose Properties from the contextual menu. The properties form for the object opens with the General tab displayed.

4 

Specify a filter for the search, if required, and click on the Search button.

5 

Choose an entry and click on the Properties button.

6 

Perform of the following:

  1. If you are viewing a simulated OSPF area, the Simulated OSPF Area (Edit) form opens with the General tab displayed. Perform To view and configure a simulated OSPF area .

  2. If you are viewing a simulated OSPF link, the Simulated OSPF Link (Edit) form opens with the General tab displayed. Perform To view and configure a simulated OSPF virtual link .

  3. If you are viewing a simulated OSPF virtual link, the Simulated OSPF Virtual Link (Edit) form opens with the General tab displayed. Perform To view and configure a simulated OSPF virtual link .

  4. If you are viewing a simulated OSPF subnet, the Simulated OSPF Subnet (Edit) form opens with the General tab displayed. Perform To view and configure a simulated OSPF subnet .

  5. If you are viewing a simulated OSPF router, the Simulated OSPF Router (Edit) form opens with the General tab displayed. Perform To view and configure a simulated OSPF router .

  6. If you are viewing a simulated ISIS link, the Simulated ISIS Link (Edit) form opens with the General tab displayed. Perform To view and configure a simulated ISIS link .

  7. If you are viewing a simulated ISIS routing domain, the Simulated ISIS Routing Domain (Edit) form opens with the General tab displayed. Perform To view and configure a simulated ISIS routing domain .

  8. If you are viewing a simulated ISIS subnet, the Simulated ISIS Subnet (Edit) form opens with the General tab displayed. Perform To view and configure a simulated ISIS subnet .

  9. If you are viewing a simulated ISIS router, the Simulated Router (Edit) form opens with the General tab displayed. Perform To view and configure a simulated ISIS router .

7 

Close the SIMULATION - IGP Model - Scenario form, if required.

8 

Close the SIMULATION - IGP Model - Scenario topology map, if required.

End of steps

© 2024 Nokia. Nokia Confidential Information

Use subject to agreed restrictions on disclosure and use.