To view and configure a simulated ISIS router

Steps
 
1 

Perform To open a scenario to open a scenario.

2 

Right-click on a router and choose Properties from the contextual menu. The Simulated ISIS Router (Edit) form opens with the General tab displayed.

3 

Configure the parameters:

  • Name

  • Description

  • ISIS Router Flags

  • Administrative State

The CPAM automatically sets the attached flag in the ISIS router flags if the router is connected to both L1 and L2 levels.

4 

Click on the MPLS tab button.

5 

Configure the Administrative State parameter.

6 

Click on the RSVP tab button.

7 

Configure the Administrative State parameter.

8 

Click on the OK button to save the configuration and close the Simulated Router (Create) form.

9 

Perform To add a simulated ISIS link to create a link between two ISIS routers, if required.

10 

Click on the Impact Analysis button on the SIMULATION - IGP Model - Scenario topology map.

11 

Close the SIMULATION - IGP Model - Scenario topology map.

End of steps

© 2024 Nokia. Nokia Confidential Information

Use subject to agreed restrictions on disclosure and use.