To assign a router ID to ISIS routers with no TE router ID
When to use
Perform this procedure to assign a router ID to an ISIS router with no TE router ID when the TopologyIsisSystemError alarm is raised by the CPAM.
Steps
1 |
Choose Tools→Route Analysis→IGP Network Data from the NFM-P main menu. The IGP Network Data form opens. |
2 |
Choose ISIS System ID Mapping (CPAM: Topology) and click Search. |
3 |
Choose an entry and click Properties. The ISIS System ID Mapping (Edit) form opens. |
4 |
Configure the Router ID parameter. Note: The Router ID should be an IP address that is reachable (via ISIS) on the node. |
5 |
Save your changes and close the forms. End of steps |
© 2024 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.