To configure bandwidth notification on Wavence nodes

Supported nodes and ports

The bandwidth notification can be enabled on Wavence MSS ports or on the radio port of a Wavence SA.

Steps
 

In the navigation tree Equipment view, right-click on a Wavence and choose Properties. The Network Element (Edit) form opens.


Click on the Bandwidth Notification tab, and select a port in the Port panel. For a Wavence SA, the port is automatically selected.


Configure the Status parameter as Disabled and click Apply, then configure the required parameters in the Settings panel.

Note: The VLAN ID for a Wavence SA ranges from 0 to 4080, whereas for a Wavence SM, it ranges from 1 to 4080.


Configure the Status parameter as Enabled.


Save your changes and close the form.

End of steps