Contents


Microwave Radio User Guide

Legal notice

Contents

About this document

1. Wavence device support

Wavence device support

Wavence management support

NSP

NEtO

WebCT

To open WebCT from NSP

To open WebCT from NFM-P

To reset the WebCT password on a Wavence UBT-SA node

To change the WebCT password on one or more Wavence nodes using the NFM-P

To change the WebCT password on one or more Wavence nodes using an NSP operation

2. Wavence device commissioning and management

Overview

Wavence management

Workflow to commission and manage Wavence devices

To prepare a Wavence NE for NFM-P management

To configure polling for a Wavence

To collect Wavence statistics from an NFM-P auxiliary server

To retrieve RSL files, I&C files, or log files stored by the Wavence using the NSP

To create or modify a file retrieval policy in the NFM-P

To assign a file retrieval policy to a Wavence device in the NFM-P

To retrieve log files stored by Wavence devices using the NFM-P

To retrieve RSL files stored by Wavence devices using the NFM-P

To retrieve I&C files stored by Wavence devices using the NFM-P

To configure Wavence NE mediation for microwave backhaul L3 services

Workflow to configure MPR system settings on Wavence MSS nodes using the NSP

To display Wavence backhaul service status information on the NSP Network Map and Health dashboard

3. Wavence statistics support

Wavence statistics support

To configure radio interface performance management statistics at the port level

To configure link budget calculation statistics

To configure bulk changes for performance management statistics

RSL Deviation Alerts

Wavence example object filters for the NSP

Workflow to configure NSP test templates for Wavence CFM Loopback and CFM Stats

4. Wavence software upgrade

General description

Software upgrade workflow

To perform an on-demand Wavence software upgrade

To manage the Wavence running software

5. Wavence migration to revised service model

Migration workflow

To perform pre-upgrade tasks

To perform post-upgrade tasks

6. Wavence SCM device management

Secure certification mode (SCM)

Workflow to manage Wavence SCM devices

To configure an SNMPv3 user account on a Wavence SCM device

To configure Wavence SCM NE mediation

To configure a discovery rule

7. Wavence object configuration

Overview

Workflow to configure and manage Wavence device objects

To configure the system settings on a Wavence

To resolve Wavence MIB inconsistencies

To update the software activation status for Wavence SA nodes

To configure a scope of command role for NEtO access

To cross-launch NEtO from NFM-P

8. Wavence shelf and card object configuration

Overview

Supported Wavence device objects and auxiliary equipment

Equipment configuration

Workflow to manage Wavence devices

Workflow to manage shelf objects on Wavence devices

To perform protection switching in Core-E and CorEvo cards

To migrate the Wavence UBT-SA connected to a 7705 SAR from standalone mode to single NE mode

9. Wavence port object configuration

Overview

Workflow to manage port objects on Wavence devices

To configure Wavence Ethernet ports

To configure LLDP

To collect and view analog radio statistics on Wavence 1x Radio modem ports

To collect performance management statistics on Wavence 1x Radio modem ports

To configure Wavence port segregation on an EAS module

To configure a loopback test on Wavence ports

To configure 802.3ah EFM OAM remote loopbacks on Wavence ports

To configure Tx mute on radio ports

To configure WRED QoS on a Wavence MSS

To configure 2.5 Gb/s speed on the SFP port of CorEvo card

To configure bandwidth notification on Wavence nodes

10. Wavence LAG object configuration

Overview

Workflow to configure and manage Wavence LAG objects

To create an Ethernet LAG on a Wavence

To delete a Wavence Ethernet LAG

11. Wavence synchronization management

Introduction

IEEE 1588v2 PTP clocks

To configure synchronization on Wavence Ethernet ports

To configure synchronization on a CorEvo card or MSS-1 shelf using SYNC-IO SFPs

To configure an IEEEv2 1588 TC on a Wavence shelf

To configure IEEEv2 1588 BC and OC PTP clocks

To configure the PTP clock as a synchronization source

To configure the ToD

12. Wavence inventory management

Radio port inventory — Wavence SA and Wavence MSS-1c

To list and sort inventory information

To save an inventory list

To configure radio port inventory for Wavence SA and Wavence MSS-1c devices

Radio port inventory – Wavence devices

To configure radio port inventory for Wavence devices

Radio LAG member inventory – Wavence devices

To configure radio LAG member inventory for Wavence devices

Inventory list of Wavence system settings

13. QoS policies

Overview

Workflow to configure Wavence QoS policies

To configure a 9500 Radio Interface Queue Map policy

To configure a 9500 NE QoS policy

14. Wavence service tunnels

Overview

Configuring service tunnels on a Wavence

To create an Ethernet radio ring on a Wavence

15. Wavence microwave backhaul service management

Microwave backhaul service configuration

To configure microwave backhaul services

To complete a ring by automatically adding the ring adjacencies

To copy a microwave backhaul service

To view the microwave backhaul service objects

Microwave backhaul service discovery

To discover a microwave backhaul service

To move Wavence backhaul sites

To separate microwave backhaul service topologies

To propagate microwave backhaul service name to sites

To list microwave backhaul services

Microwave backhaul service associations

Microwave backhaul service management— considerations/limitations

Microwave backhaul service creation using NSP Intent-Based Service Fulfillment

16. Wavence composite service

Composite service

To configure a composite service

17. Wavence microwave backhaul L3 SNMP management

L3 network interface management

Workflow to configure L3 VPN transport setup

Workflow to configure a VPRN service using the Service Fulfillment application

To initialize an L3 VLAN ID

To configure a System and Network interface

To initialize the MPLS protocol

To configure an MPLS interface

To configure a static route

To configure a static LSP

To create static hops from an MPLS interface properties window

To configure static routes on a VPRN site

To create and configure a Two-Way Active Measurement Protocol Light reflector

To view all the configured TWAMP Light reflectors

To create an SDP Tunnel

To create a black-hole route

To configure a SAP access ingress policy

To configure a SAP access egress policy

To configure a QoS network policy

To configure an Auto-ID range for policies

To configure a VPRN service

To configure a VLAN group

To configure OSPFv2 Router ID

Workflow to configure OSPFv2

To configure OSPFv2 instance on a Routing instance

Workflow to configure OSPFv3

To enable LFA and remote LFA on an OSPF instance

To create an OSPF area

To add a Layer 3 interface to an OSPF router

To configure OSPF segment routing and discover dynamic LSPs

To configure IP/MPLS Service Tunnel

To create and run a VPRN Ping test from a service manager form

To create and run a VPRN Ping test on a SAP

Wavence VPRN service — considerations/limitations

Appendix A. NEtO, WebCT, and NFM-P management comparison

Support for Wavence management features across element managers