Workflow to manage shelf objects on Wavence devices
Workflow sequence
The following workflow describes the sequence of high-level tasks required to manage Wavence device shelf objects. For general shelf object management information, see the “Shelf and card object configuration” chapter of the NSP NFM-P Classic Management User Guide.
Process
1 |
Configure NTP; see the “Shelf and card object configuration” chapter of the NSP NFM-P Classic Management User Guide. |
2 |
Configure the card, card slot, and fan objects, and card and port protection using a Wavence element manager; see the Wavence documentation. |
3 |
If required, configure synchronization using SYNC-IO SFPs on the CorEvo card or MSS-1 shelf; see To configure synchronization on a CorEvo card or MSS-1 shelf using SYNC-IO SFPs. |
4 |
If required, configure a 1588 transparent clock; see To configure an IEEEv2 1588 TC on a Wavence shelf. |
5 |
Upgrade the device software, as required; see Chapter 4, Wavence software upgrade. |
6 |
As required, migrate a Wavence SA connected to a 7705 SAR from standalone mode to single NE mode; see To migrate the Wavence UBT-SA connected to a 7705 SAR from standalone mode to single NE mode. |
7 |
As required, switch between an in-service protected Radio link and a standby protected Radio link for Wavence devices using a Wavence element manager. |