Chapter 15: Shelf and card object configuration
Configuring shelf objects using the NFM-P
Power management configuration
Workflow to manage shelf objects
Working with card and card slot objects
Card provisioning and chassis modes
Working with daughter card objects
Working with extension shelf objects
Procedures for shelf object configuration
To configure an 1830 VWM shelf
To configure the device chassis mode
To configure a VWM shelf for a 7210 SAS
To configure dry contact sensors
To configure the IMM card type on a 7210 SAS-R
To configure switch fabric multicast ingress replication rates
To configure timing synchronization
To configure the IEEE 1588 PTP clock on a 7210 SAS, 7250 IXR, 7450 ESS, or 7750 SR
To configure the IEEE 1588 PTP peer of a 7210 SAS, 7250 IXR, 7450 ESS, or 7750 SR
To configure IEEE 1588 PTP ports on a 7210 SAS, 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS
To configure alternate profiles under IEEE PTP Clock on a 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS
To associate an alternate profile to an IEEE PTP Port on a 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS
To configure an IEEE 1588 PTP clock on a 7705 SAR
To configure an IEC/IEEE 61850-9-3 PTP clock on a 7705 SAR
To configure alternate profiles under IEEE PTP Clock on a 7705 SAR
To associate an alternate profile to an IEEE PTP Port on a 7705 SAR
To configure an IEEE 1588 PTP port on a 7705 SAR
To configure system time on a 7705 SAR
To configure SNTP on a 7705 SAR
To configure VPLS scalability on a 7705 SAR
To configure NTP on supported devices
To configure NTP on 1830 VWM OSU devices
To configure SCADA on a 7705 SAR
To configure voice conference bridging on a 7705 SAR
To configure a 7705 SAR MW link
To configure a 7705 SAR MW link member
To configure 7705 SAR auxiliary alarm definitions
To manage an OmniSwitch running configuration
To configure OmniSwitch health monitoring
To configure a CCM on a 7950 XRS-20
To manage the internal fan on a 7210 SAS-D
To enable fan speed monitoring on a 7x50 device
To configure a power supply tray
To configure a power management zone
To configure a variable power supply APEQ
To configure optical protection switching on an 1830 VWM OPS shelf
To configure bi-directional protection switching on an 1830 VWM OPS shelf
To configure an OPS protection audit entity on an 1830 VWM OSU shelf
To activate or deactivate a PAE
Procedures for card and card slot object configuration
To configure an Xiom-s card slot
To assign a network queue policy to a forwarding plane
To assign an FP Resource policy to a forwarding plane
To configure a network ingress pool on a forwarding plane
To view the operational MC path management properties of a forwarding plane
To configure egress WRED queue control on an XCM, IOM 3 or IMM forwarding plane
To configure ingress policy accounting policer limits on a forwarding plane
To configure IMPM on an XCM, 2 x XP MDA IOM 3, or IMM forwarding plane
To configure an ingress queue group on a forwarding plane
To configure NE DDoS protection on a forwarding plane
To enable Ingress Buffer Allocation
To initialize drop priority mode on card forwarding plane
To select system resource profile policies for the 7210 SAS-R or 7210 SAS-S/Sx VC
To configure OmniSwitch stacks
To configure an OmniSwitch CPU temperature threshold
To modify the SFP profile and SFP profile rate on the 1830 VWM
To upgrade a license path on an IOM-1, IOM5-e, and XIOM-s
Procedures for daughter card slot object configuration
To upgrade a license path on an FP4 MDA
To specify an event action for a 7x50 MDA
To view the operational multicast channel properties of an MDA
To configure a module card on a 7705 SAR-M/ME or 7705 SAR-H
To configure GNSS receiver functions on a 7705 SAR-Hm
To perform a manual SIM switchover on a 7705 SAR-Hm
Procedures for bundle configuration
To configure an MLPPP bundle for multiclass service transmission
To configure an MLPPP bundle as a network interface on a channelized ASAP MDA
Procedures for extension shelf configuration
To configure satellite shelf uplink port topology
To configure flexible satellite port mapping for Ethernet satellites
To configure tunable optics for Ethernet satellites
To associate a port template on an Ethernet satellite shelf
To configure local forward on Ethernet satellite shelf
To enable transparent clock functionality on an Ethernet satellite
To perform a software upgrade on an extension shelf